Boat Building Forum

Find advice on all aspects of building your own kayak, canoe or any lightweight boats

Re: The feather, and hollow-core paddles
By:Don Beale
Date: 12/18/2001, 5:00 pm
In Response To: Jeez! ... next they'll register paddles? :) (risto)

The rock, #2 turned out better than I ever expected. I made a hollow core by playing with the lamination structure. Unfortunately I dont have a scale. I havent actually tried it yet, didnt get out last weekend. The only disappointment was the ash lamination at the tips, which tends to splinter. Ive come to the conclusion that glass tips are the way to go.

The technique has led me to a jig that I can use to lay up hollow core, hollow core w/ glass inside for strength, with truss-type, block structures, or balsa-cored, or foam for that matter. I'm thinking seriously about production. Two prototypes are on the ways, and I just came from Alder Creek, where Steve says if I build 'em, he can sell 'em... I have a little more experimenting to do with strength/stiffness of different internal structures, and then we'll see. I'll have a prototype in his shop by the second week in January.

: and BTW, how did "the rock, nr 2" turn out? Or has filling Santa's
: sled been keeping you too busy lately, to finish any new paddles...

: risto

Messages In This Thread

Other: Hull Identification Numbers
George F. Johnson -- 12/17/2001, 2:08 pm
Re: Its different by state
Don Beale -- 12/18/2001, 1:41 am
Registration numbers and HINs are not the same
Paul G. Jacobson -- 12/18/2001, 9:22 pm
Re: Registration numbers and HINs are not the same
Don Beale -- 12/19/2001, 1:40 am
Re: Its different by state
Shawn Baker -- 12/18/2001, 10:44 am
Re: Its different by state
Don Beale -- 12/18/2001, 11:43 am
Jeez! ... next they'll register paddles? :)
risto -- 12/18/2001, 1:29 pm
Re: The feather, and hollow-core paddles
Don Beale -- 12/18/2001, 5:00 pm
Congratulations!!
Shawn Baker -- 12/19/2001, 12:08 am
Re: We'll see...
Don Beale -- 12/19/2001, 1:29 am
Re: We'll see...
Shawn Baker -- 12/20/2001, 12:00 am
Re: We'll see...
Greg Stamer -- 12/19/2001, 9:26 am
Re: Production
Shawn Baker -- 12/20/2001, 12:02 am
Re: Production paddles
Don Beale -- 12/19/2001, 11:36 am
Re: Side-Incomes
Shawn Baker -- 12/20/2001, 12:04 am
Re: Thats the idea...
Don Beale -- 12/20/2001, 12:44 pm
Congratulations!
risto -- 12/19/2001, 12:29 pm
Re: Congratulations!
Don Beale -- 12/19/2001, 12:57 pm
Re: Custom vs. semi-custom
Shawn Baker -- 12/20/2001, 12:18 am
Re: Custom vs. semi-custom
risto -- 12/20/2001, 11:00 am
Re: No showing this at R2K?!?!
Don Beale -- 12/20/2001, 12:37 pm
Re: Perceived value
Shawn Baker -- 12/20/2001, 1:12 pm
Re: Perceived value
risto -- 12/21/2001, 8:16 am
Re: Congratulations!
risto -- 12/19/2001, 1:13 pm
Re: Congratulations!
Don Beale -- 12/19/2001, 2:10 pm
Re: Congratulations!
Brian Nystrom -- 12/19/2001, 1:38 pm
Re: Jeez! ... next they'll register paddles? :)
Julie Kanarr -- 12/18/2001, 4:56 pm
Re: Jeez! ... next they'll register paddles? :)
Don Beale -- 12/18/2001, 5:03 pm
Recycle the city Xmas tree :)
Paul G. Jacobson -- 12/18/2001, 8:57 pm
Re: Its different by state
Shawn Baker -- 12/18/2001, 12:49 pm
Re: Other: Hull Identification Numbers
Paul G. Jacobson -- 12/17/2001, 8:31 pm
Re: Other: Hull Identification Numbers
jim kozel -- 12/17/2001, 10:20 pm
Re: Other: Hull Identification Numbers
Bill Price -- 12/18/2001, 12:49 am
Re: I dare you!
Shawn Baker -- 12/18/2001, 1:15 am
Re: I dare you!
KenC -- 12/21/2001, 9:19 am
Kayak Kites
Brian Nystrom -- 12/21/2001, 12:15 pm
Re: Yes. In Ohio you register Inner Tubes :\ *NM*
Roger Nuffer -- 12/20/2001, 10:19 am
deep, um, thoughts -- yeah, that's it, thoughts
Paul G. Jacobson@aol.com -- 12/20/2001, 12:02 am
Re: deep, um, thoughts -- yeah, that's it, thought
Shawn Baker -- 12/20/2001, 11:59 am
Re: Other: Hull Identification Numbers
Bill Price -- 12/17/2001, 3:53 pm
Re: Other: Hull Identification Numbers
Shawn Baker -- 12/17/2001, 6:27 pm
Re: Other: Hull Identification Numbers
Julie Kanarr -- 12/18/2001, 9:31 am
Re: Uh Oh.
Shawn Baker -- 12/18/2001, 10:37 am
Re: See you there :) *NM*
Don Beale -- 12/18/2001, 1:35 am