: Bob - there was a long discussion about the subject quite a while back. The
: simple instructions are to print your image onto tissue paper, and then
: put under your epoxy. In my case, I taped the tissue paper to the top edge
: of a regular sheet of paper so the tissue paper didn't wad up in the
: printer. My label went on under the glass. (Trim the paper fairly close to
: the image to reduce / avoid any ghosting.) I suspect Chris did something
: similar.

I printed on tissue paper, tracing paper, but what worked best for me was the thin Christmas paper. It printed better and the white ghosting dissapeared much better then the other two.

John