Boat Building Forum
Find advice on all aspects of building your own kayak, canoe or any lightweight boats
Re: Paddle: bandsaw & sanding madness
By:Greg Stamer
Date: 1/8/2002, 2:12 pm
Date: 1/8/2002, 2:12 pm
In Response To: Paddle: bandsaw & sanding madness (Dan St. Gean)
: Following some internet plans, I roughed out a Greenland paddle and began
: sanding it. Once I finish working through the sanding phase, what should I
: finish it with? Should I bother doing something to protect the ends?
There was a thread on the Greenland forum that discussed this, that you might find useful at http://www.qajaqusa.org/cgi-bin/GreenlandTechniqueForum_config.pl/read/193.
Greg Stamer
Messages In This Thread
- Paddle: bandsaw & sanding madness
Dan St. Gean -- 1/7/2002, 4:12 pm- Re: Paddle: bandsaw & sanding madness
Greg Stamer -- 1/8/2002, 2:12 pm- Re: Paddle: bandsaw & sanding madness
Brian Nystrom -- 1/8/2002, 12:19 pm- Re: Paddle: bandsaw & sanding madness
Don Beale -- 1/7/2002, 5:04 pm - Re: Paddle: bandsaw & sanding madness
- Re: Paddle: bandsaw & sanding madness
