Boat Building Forum

Find advice on all aspects of building your own kayak, canoe or any lightweight boats

Re: Strip: Nick's Footrest
By:Pete Rudie
Date: 1/11/2002, 9:49 pm
In Response To: Re: Strip: Nick's Footrest (Jon Murray)

: Pete,

: I can't quite visualize how this type of foot brace works. Does it mount to
: the centerline of the hull?
Right, the bottom of the mahogany beam will be epoxied to the bottom of the boat at the centerline.

: It looks like a heel-rest rather than
: something the ball of your feet would touch.
The angles were ingeniously designed so that both the splay of the legs and the natural angle of the foot to the lower leg are supported in a neutral position.

: I might be looking at the
: scale of it wrong. Does it pretty much span across the whole width of the
: boat?
Right, there is about a 2" gap all around it. Just enough room to stow a paddle or three.

: Do the ply plates rest agaist the hull to steady the rocking of the
: whole contraption?
No, the wings stand proud from the bottom, but rocking is not much of a factor. It's not rock-solid like conventonal footpegs, but when it's all snugged up the pressure of the feet tend to lock it all down nicely. And the compound leverage of the tension line allows it to get snugged down really tight, but it's easy and quick to reach down, pop the line and stretch your legs.

Messages In This Thread

Strip: Nick's Footrest *Pic*
Pete Rudie -- 1/11/2002, 2:29 pm
Re: Strip: Nick's Footrest
Pete Notman -- 1/13/2002, 5:22 pm
Re: Strip: Nick's Footrest
Pete Rudie -- 1/13/2002, 6:09 pm
Re: Strip: Nick's Footrest
Scott Fitzgerrell -- 1/11/2002, 6:48 pm
Re: Strip: Nick's Footrest
Ed Walshe - Dublin -- 1/12/2002, 3:14 pm
Re: Strip: Nick's Footrest
Pete Rudie -- 1/11/2002, 10:03 pm
Nick's Footrest *Pic*
Bill Price -- 1/11/2002, 7:25 pm
Re: Nick's Footrest
Pete Rudie -- 1/12/2002, 2:41 am
Re: Nick's Footrest
Bill Price -- 1/14/2002, 12:28 pm
Re: Nick's Footrest
mike allen ---> -- 1/11/2002, 7:43 pm
skinner skeg idea
mike allen ---> -- 1/11/2002, 8:09 pm
Re: skinner skeg idea
Bill Price -- 1/14/2002, 12:27 pm
Re: Strip: Nick's Footrest
Jon Murray -- 1/11/2002, 2:59 pm
Re: Strip: Nick's Footrest
Pete Rudie -- 1/11/2002, 9:49 pm