Boat Building Forum
Find advice on all aspects of building your own kayak, canoe or any lightweight boats
Re: Epoxy: time between saturation and fill
By:John Monfoe
Date: 1/20/2002, 4:33 am
Date: 1/20/2002, 4:33 am
In Response To: Epoxy: time between saturation and fill (canary)
: Just getting ready to glass the hull on a Pygmy and wanted to know if, after
: saturation, the fill coats need to be applied every 24 hours. Will waiting
: longer mess thing up later? Using Sys III epoxy and they say 72 hours
: without sanding. Does this apply to the fill coats as well?
: Larry
This is from memory Larry, but I used Raka epoxy and I think the dirrections for their epoxy said 18 hours before having to sand. Anyway I got my coats on with in that 18 hour period.
John
Messages In This Thread
- Epoxy: time between saturation and fill
canary -- 1/20/2002, 12:51 am- Re: Epoxy: time between saturation and fill
Keith Marsh -- 1/21/2002, 3:39 pm- Re: Epoxy: time between saturation and fill
LeeG -- 1/21/2002, 4:18 pm- Re: Epoxy: time between saturation and fill
Keith Marsh -- 1/21/2002, 5:59 pm- Re: Epoxy: time between saturation and fill
LeeG -- 1/21/2002, 7:17 pm
- Re: Epoxy: time between saturation and fill
- Re: Epoxy: time between saturation and fill
- Re: Epoxy: time between saturation and fill
Greg Root -- 1/20/2002, 10:22 am- Re: Epoxy: time between saturation and fill
LeeG -- 1/20/2002, 7:48 am- Re: Epoxy: time between saturation and fill
canary -- 1/20/2002, 11:57 am
- Re: Epoxy: time between saturation and fill
John Monfoe -- 1/20/2002, 4:33 am - Re: Epoxy: time between saturation and fill
- Re: Epoxy: time between saturation and fill
