Re: Epoxy: time between saturation and fill
By:Keith Marsh
Date: 1/21/2002, 5:59 pm
Date: 1/21/2002, 5:59 pm
In Response To: Re: Epoxy: time between saturation and fill (LeeG)
Hmmm... THAT I don't remember! ... I THINK only the hull/deck seam is taped (and that's only done where you can reach from the cockpit) but I'll check tonight. I DO remember that the cloth only extends up a couple of inches above the single chine on each side. Hmmm... Now you have me wondering... has anyone had problems without taping the seams inside? I'm new at this and only had the AT on the water twice before winter set in.
: Keith, does your Tern have 1 1/2" tape and 6oz cloth or only 6oz cloth
: on the inside?
Messages In This Thread
- Epoxy: time between saturation and fill
canary -- 1/20/2002, 12:51 am- Re: Epoxy: time between saturation and fill
Keith Marsh -- 1/21/2002, 3:39 pm- Re: Epoxy: time between saturation and fill
LeeG -- 1/21/2002, 4:18 pm- Re: Epoxy: time between saturation and fill
Keith Marsh -- 1/21/2002, 5:59 pm- Re: Epoxy: time between saturation and fill
LeeG -- 1/21/2002, 7:17 pm
- Re: Epoxy: time between saturation and fill
- Re: Epoxy: time between saturation and fill
- Re: Epoxy: time between saturation and fill
Greg Root -- 1/20/2002, 10:22 am- Re: Epoxy: time between saturation and fill
LeeG -- 1/20/2002, 7:48 am- Re: Epoxy: time between saturation and fill
canary -- 1/20/2002, 11:57 am
- Re: Epoxy: time between saturation and fill
John Monfoe -- 1/20/2002, 4:33 am - Re: Epoxy: time between saturation and fill
- Re: Epoxy: time between saturation and fill