Boat Building Forum

Find advice on all aspects of building your own kayak, canoe or any lightweight boats

Printer toner?
By:Pete Rudie
Date: 1/22/2002, 7:24 pm
In Response To: Re: If only it was black. Right down the keel *NM* (Roger Nuffer)

You could probably toss in some printer toner and darken it right up. A very small amount of it darkens neat epoxy, and I would expect it to work with this stuff too.

Messages In This Thread

Material: keel protection
Paul Grant -- 1/19/2002, 6:33 pm
Re: Material: keel protection
LeeG -- 1/20/2002, 8:02 am
Re: Material: keel protection *Pic*
John Monfoe -- 1/20/2002, 7:51 am
can you use this stuff as sandpaper?
Paul G. Jacobson -- 1/22/2002, 9:59 pm
Re: can you use this stuff as sandpaper?
John Monfoe -- 1/23/2002, 7:26 am
www.rentooling.com
Keith Marsh -- 1/22/2002, 10:07 am
Re: If only it was black. Right down the keel *NM*
Roger Nuffer -- 1/22/2002, 1:37 pm
Printer toner?
Pete Rudie -- 1/22/2002, 7:24 pm
RP 3260
Pete Rudie -- 1/20/2002, 2:29 pm
Re: RP 3260
LeeG -- 1/21/2002, 7:18 am
Re: RP 3260
John Monfoe -- 1/22/2002, 5:26 am
Re: RP 3260
Pete Rudie -- 1/21/2002, 1:12 pm
CLC recommends.. *Pic*
Pete Rudie -- 1/19/2002, 11:30 pm
Re: CLC recommends..
Paul G. Jacobson -- 1/22/2002, 9:34 pm
Re: CLC recommends.. *Pic*
Pete Rudie -- 1/26/2002, 2:41 pm
re graphite
Paul G. Jacobson -- 1/28/2002, 11:01 pm
Re: Material: keel protection
James Neely -- 1/19/2002, 6:49 pm