Boat Building Forum

Find advice on all aspects of building your own kayak, canoe or any lightweight boats

Re: Paddle: Hey Pete Rudie--CPES final opinion?
By:Shawn Baker
Date: 1/24/2002, 2:12 pm
In Response To: Re: Paddle: Hey Pete Rudie--CPES final opinion? *Pic* (Pete Rudie)

: Yeah, the stroke is different, but the real difference is on your offside
: roll. Gotta love that ugly stick!

Offside roll? Congratulations!!!

: How about a half-round of backer rod for caulking, as a permanent core? It's
: dirt cheap, comes in 1/4", 3/8", 1/2", 5/8", 3/4"
: and on up, so you can dial in any dimension you want. Downside: hard to
: taper. Or maybe not, hot glue it to a scrap strip and run it through the
: table saw at an angle, from 1/2 diameter to feather edge.

That's a great idea--I may alternately use some pink or blue building foam--hot glued and carved before vacuum-bagging.

Then again, a couple of years ago, I tried building hand-laid foam-cored glass blades. Maybe I should revisit that again. Carve the face of the blade, vacuum-bag glass to it, carve the back, and then glass the back and VB it to the shaft at the same time.

::Pool sessions

: A couple times, just enough to keep some muxcle memory going. Did I mention
: that you gotta love those ugly sticks?

If you run into Bill McKenzie, tell him "hi" for me.

Shawn

Messages In This Thread

Paddle: Hey Pete Rudie--CPES final opinion?
Shawn Baker -- 1/23/2002, 4:44 pm
Re: Paddle: Hey Pete Rudie--CPES final opinion?
Severne -- 1/24/2002, 6:01 pm
Re: Paddle: Hey Pete Rudie--CPES final opinion?
Shawn Baker -- 1/24/2002, 7:36 pm
I Wonder....
Ted Henry -- 1/24/2002, 8:12 pm
Re: I Wonder....
Pete Rudie -- 1/24/2002, 8:50 pm
Re: I Wonder....
Severne -- 1/25/2002, 5:22 pm
Hey Mr. Engineer guy,
Pete Rudie -- 1/25/2002, 7:42 pm
Re: Hey Mr. Engineer guy,
Severne -- 1/28/2002, 11:19 am
Hey, I can break 'em with the best...
Pete Rudie -- 1/29/2002, 12:17 pm
Re: Paddle: Hey Pete Rudie--CPES final opinion?
Pete Rudie -- 1/24/2002, 7:59 pm
Re: Paddle: Hey Pete Rudie--CPES final opinion?
Shawn Baker -- 1/25/2002, 10:16 am
Re: Paddle: Hey Pete Rudie--CPES final opinion?
Joe -- 1/25/2002, 6:38 pm
Re: Paddle: Hey Pete Rudie--CPES final opinion?
Nick Schade - Guillemot Kayaks -- 1/26/2002, 11:36 am
Re: Paddle: Hey Pete Rudie--CPES final opinion?
Pete Rudie -- 1/25/2002, 7:35 pm
Re: Paddle: Hey Pete Rudie--CPES final opinion?
Nick Schade - Guillemot Kayaks -- 1/25/2002, 9:58 am
Re: Paddle: Hey Pete Rudie--CPES final opinion?
Pete Rudie -- 1/25/2002, 11:04 am
Oops, I goofed...
Pete Rudie -- 1/24/2002, 8:12 pm
Re: Paddle: Hey Pete Rudie--CPES final opinion?
Don Beale -- 1/24/2002, 7:10 pm
Re: Paddle: Hey Pete Rudie--CPES final opinion?
Pete Rudie -- 1/25/2002, 2:20 am
Re: Paddle: Hey Pete Rudie--CPES final opinion? *Pic*
Pete Rudie -- 1/24/2002, 12:37 pm
Ok, Pete. Could you explain CPES? *NM*
Bill Price -- 1/24/2002, 3:54 pm
Clear Penetrating Epoxy Sealer
Pete Rudie -- 1/24/2002, 7:27 pm
Re: CPES
KenC -- 1/25/2002, 12:48 am
Re: CPES
Pete Rudie -- 1/25/2002, 2:03 am
Pete is Right On The Money about CPES *Pic*
Joe Greenley -- 1/25/2002, 3:15 am
Re: You shouldn't have posted that picture
Shawn Baker -- 1/25/2002, 10:14 am
Re: Pete is Right On The Money about CPES
Pete Rudie -- 1/25/2002, 4:24 am
Re: Pete - CPES as a seal coat - Will Try It
Joe Greenley -- 1/25/2002, 11:56 am
Re: Pete is Right On The Money about CPES
Shawn Baker -- 1/25/2002, 10:20 am
Re: Borates and Wood deterioration....
John B. -- 1/25/2002, 7:35 pm
Re: Borates and Wood deterioration....
John B. -- 1/25/2002, 7:34 pm
Re: Pete is Right On The Money about CPES
Pete Rudie -- 1/25/2002, 10:55 am
Re: Paddle: Hey Pete Rudie--CPES final opinion?
Shawn Baker -- 1/24/2002, 2:12 pm