Boat Building Forum

Find advice on all aspects of building your own kayak, canoe or any lightweight boats

Re: Epoxy: To Evaporate and Blush or not to .....
By:LeeG
Date: 1/30/2002, 11:17 pm
In Response To: Re: Epoxy: To Evaporate and Blush or not to ..... (Joe)

Keerist Joe, thanks for not getting down on my response. You appear to want an immediate answer because you're about to start in on the project. So pick up the phone and get an exact answer from him. E-mails are a low priority method of communication with opportunities for miscommunication.

I find people may sell products used on solid woods but may not have used them on epoxied 4mm plywood,or in your case CPES used on log cabins and large timbers of boats but not personally used them on 3/16" strip hulls. So the experience of the person selling you the product may provide you with an answer based on his experience, I don't know if that is transferable to a strip hull with all the peculiarities that may entail. Thus the vagueness of the responses on the board and his.

I'm curious about the stuff and application as well, keep us posted.

Messages In This Thread

Epoxy: To Evaporate and Blush or not to .....
Joe -- 1/30/2002, 8:20 pm
Re: Epoxy: To Evaporate and Blush or not to .....
Steve Smith -- 2/1/2002, 4:38 pm
Thank you Mr. Smith
Pete Rudie -- 2/1/2002, 5:52 pm
Re: Epoxy: To Evaporate and Blush or not to .....
Jim Chowning -- 2/1/2002, 10:40 am
Thanks for the answer
Pete Rudie -- 2/1/2002, 12:09 pm
Re: Thanks for the answer
Jim Chowning/The Rot doctor -- 2/1/2002, 12:55 pm
Re: Thanks for the answer
LeeG -- 2/1/2002, 1:41 pm
Re: Thanks for the answer
Jim Chowning/The Rot doctor -- 2/2/2002, 12:31 pm
Re: Thanks for the answer *Pic*
Pete Rudie -- 2/2/2002, 1:46 pm
Re: Epoxy: To Evaporate and Blush or not to .....
Severne -- 1/31/2002, 11:52 am
Just when things looked clear...
Pete Rudie -- 1/31/2002, 9:31 pm
Re: Just when things looked clear...
Joe -- 2/1/2002, 3:01 am
Re: you are a reasonable guy
LeeG -- 1/31/2002, 10:52 pm
Only 1/32" Penetration ???.....
Joe -- 1/31/2002, 2:40 pm
Re: Greater Penetration
Chip Sandresky -- 2/1/2002, 12:45 pm
Re: Only 1/32" Penetration ???.....
Pete Rudie -- 1/31/2002, 2:56 pm
Re: Only 1/32" Penetration ???.....
Nick Schade - Guillemot Kayaks -- 2/1/2002, 10:54 am
Good point. And it IS Softwood. *NM*
Joe -- 2/1/2002, 11:11 am
however
mike allen ---> -- 1/31/2002, 3:05 pm
Re: however
Jim Chowning/The Rot doctor -- 2/1/2002, 7:36 pm
Re: however
Pete Rudie -- 1/31/2002, 6:22 pm
Re: however
mike allen ---> -- 1/31/2002, 6:38 pm
I asked Dr.Rot to come and answer us HERE!
Joe -- 1/31/2002, 4:45 pm
Re: I asked Dr.Rot to come and answer us HERE!
Nick Schade - Guillemot Kayaks -- 2/1/2002, 10:49 am
Re: Only 1/32" Penetration ???.....
LeeG -- 1/31/2002, 3:01 pm
It's not really blush .....
Pete Rudie -- 1/31/2002, 1:40 am
But could it be . . .
Paul G. Jacobson -- 1/31/2002, 10:33 pm
Good point,
Pete Rudie -- 1/31/2002, 11:50 pm
MORE than fair. Thanks *NM*
Joe -- 1/31/2002, 7:31 pm
Re: It's not really blush .....
Joe -- 1/31/2002, 3:04 am
Re: It's not really blush .....
LeeG -- 1/31/2002, 3:27 am
Re: Pure Speculation...
Nick Schade - Guillemot Kayaks -- 1/31/2002, 9:02 am
Re: Pure Speculation...
Tom Johansen -- 1/31/2002, 5:53 pm
Re: Pure Speculation...
LeeG -- 1/31/2002, 8:31 pm
Re: Pure Speculation...
Jim Chowning/The Rot doctor -- 2/1/2002, 2:01 pm
Re: Pure Speculation...
LeeG -- 2/1/2002, 5:17 pm
No speculation here...
Pete Rudie -- 1/31/2002, 6:15 pm
Dr. Rot replies ....
Joe -- 1/31/2002, 7:01 pm
Re: immaculate speculation
LeeG -- 1/31/2002, 2:56 pm
Limitations
Pete Rudie -- 1/31/2002, 11:21 am
Re: Limitations
Jim Chowning/The Rot doctor -- 2/1/2002, 1:49 pm
Re: Limitations
Nick Schade - Guillemot Kayaks -- 1/31/2002, 12:59 pm
Re: More Speculation...
Shawn Baker -- 1/31/2002, 10:46 am
Solving solvent worries
Paul G. Jacobson -- 1/30/2002, 10:50 pm
Re: Solving solvent worries
Joe -- 1/31/2002, 1:12 am
Re: Solving solvent worries
Jim Chowning/The Rot doctor -- 2/1/2002, 1:16 pm
Re: Epoxy: To Evaporate and Blush or not to .....
LeeG -- 1/30/2002, 8:54 pm
Re: Epoxy: To Evaporate and Blush or not to .....
Joe -- 1/30/2002, 10:13 pm
Re: Epoxy: To Evaporate and Blush or not to .....
LeeG -- 1/30/2002, 11:17 pm
Re: Epoxy: Good questions
don -- 1/30/2002, 10:48 pm
Re: Epoxy: To Evaporate and Blush or not to .....
Jon Murray -- 1/30/2002, 10:35 pm