Hey Neighbor!

That would work pretty well.

You could also dry-fit it, and use some CA (cyanoacrylate "superglue") between the strips before removing them. Then epoxy and glass.

Shawn Baker

Kalispell, MT

: Last fall I lost the hatch cover on my yak ... driving too fast and not
: having the thing bungeed in ... so I need to replace it. My intentions are
: to cut strips to fit, dry fit the thing, then use wax paper under the lip
: when I glue/expoxy it up. Any suggestions or tips from anyone would be
: appreciated.
: Thanks,
: Jim