Boat Building Forum

Find advice on all aspects of building your own kayak, canoe or any lightweight boats

Re: Pure Speculation...
By:Tom Johansen
Date: 1/31/2002, 5:53 pm
In Response To: Re: Pure Speculation... (Nick Schade - Guillemot Kayaks)

Touche' Nick.

But I will add my "speculation" here and "guess" that the blush or slimy stuff appearing after putting it in the pool is residues from the organic solvents used in the mix. If you can still smell the stuff, then its present and most of these solvents are going to be longer chain molecules which are not water soluable. I would guess that it really is not a blush. Blush is a byproduct of the amines in the epoxy itself and adding a solvent should not affect this. Any blush in this product is not really the amine then, but is really uncured epoxy, or most likely the solvents themselves, and the natural oils of the wood being drawn out by the solvent mixture.

Have any of you who have used the stuff looked over the MSDS for this stuff. It will tell you what chemicals are used in the mixture!

Those who are interested, get your copy of the MSDS from the Rot Docter.

Tom

Messages In This Thread

Epoxy: To Evaporate and Blush or not to .....
Joe -- 1/30/2002, 8:20 pm
Re: Epoxy: To Evaporate and Blush or not to .....
Steve Smith -- 2/1/2002, 4:38 pm
Thank you Mr. Smith
Pete Rudie -- 2/1/2002, 5:52 pm
Re: Epoxy: To Evaporate and Blush or not to .....
Jim Chowning -- 2/1/2002, 10:40 am
Thanks for the answer
Pete Rudie -- 2/1/2002, 12:09 pm
Re: Thanks for the answer
Jim Chowning/The Rot doctor -- 2/1/2002, 12:55 pm
Re: Thanks for the answer
LeeG -- 2/1/2002, 1:41 pm
Re: Thanks for the answer
Jim Chowning/The Rot doctor -- 2/2/2002, 12:31 pm
Re: Thanks for the answer *Pic*
Pete Rudie -- 2/2/2002, 1:46 pm
Re: Epoxy: To Evaporate and Blush or not to .....
Severne -- 1/31/2002, 11:52 am
Just when things looked clear...
Pete Rudie -- 1/31/2002, 9:31 pm
Re: Just when things looked clear...
Joe -- 2/1/2002, 3:01 am
Re: you are a reasonable guy
LeeG -- 1/31/2002, 10:52 pm
Only 1/32" Penetration ???.....
Joe -- 1/31/2002, 2:40 pm
Re: Greater Penetration
Chip Sandresky -- 2/1/2002, 12:45 pm
Re: Only 1/32" Penetration ???.....
Pete Rudie -- 1/31/2002, 2:56 pm
Re: Only 1/32" Penetration ???.....
Nick Schade - Guillemot Kayaks -- 2/1/2002, 10:54 am
Good point. And it IS Softwood. *NM*
Joe -- 2/1/2002, 11:11 am
however
mike allen ---> -- 1/31/2002, 3:05 pm
Re: however
Jim Chowning/The Rot doctor -- 2/1/2002, 7:36 pm
Re: however
Pete Rudie -- 1/31/2002, 6:22 pm
Re: however
mike allen ---> -- 1/31/2002, 6:38 pm
I asked Dr.Rot to come and answer us HERE!
Joe -- 1/31/2002, 4:45 pm
Re: I asked Dr.Rot to come and answer us HERE!
Nick Schade - Guillemot Kayaks -- 2/1/2002, 10:49 am
Re: Only 1/32" Penetration ???.....
LeeG -- 1/31/2002, 3:01 pm
It's not really blush .....
Pete Rudie -- 1/31/2002, 1:40 am
But could it be . . .
Paul G. Jacobson -- 1/31/2002, 10:33 pm
Good point,
Pete Rudie -- 1/31/2002, 11:50 pm
MORE than fair. Thanks *NM*
Joe -- 1/31/2002, 7:31 pm
Re: It's not really blush .....
Joe -- 1/31/2002, 3:04 am
Re: It's not really blush .....
LeeG -- 1/31/2002, 3:27 am
Re: Pure Speculation...
Nick Schade - Guillemot Kayaks -- 1/31/2002, 9:02 am
Re: Pure Speculation...
Tom Johansen -- 1/31/2002, 5:53 pm
Re: Pure Speculation...
LeeG -- 1/31/2002, 8:31 pm
Re: Pure Speculation...
Jim Chowning/The Rot doctor -- 2/1/2002, 2:01 pm
Re: Pure Speculation...
LeeG -- 2/1/2002, 5:17 pm
No speculation here...
Pete Rudie -- 1/31/2002, 6:15 pm
Dr. Rot replies ....
Joe -- 1/31/2002, 7:01 pm
Re: immaculate speculation
LeeG -- 1/31/2002, 2:56 pm
Limitations
Pete Rudie -- 1/31/2002, 11:21 am
Re: Limitations
Jim Chowning/The Rot doctor -- 2/1/2002, 1:49 pm
Re: Limitations
Nick Schade - Guillemot Kayaks -- 1/31/2002, 12:59 pm
Re: More Speculation...
Shawn Baker -- 1/31/2002, 10:46 am
Solving solvent worries
Paul G. Jacobson -- 1/30/2002, 10:50 pm
Re: Solving solvent worries
Joe -- 1/31/2002, 1:12 am
Re: Solving solvent worries
Jim Chowning/The Rot doctor -- 2/1/2002, 1:16 pm
Re: Epoxy: To Evaporate and Blush or not to .....
LeeG -- 1/30/2002, 8:54 pm
Re: Epoxy: To Evaporate and Blush or not to .....
Joe -- 1/30/2002, 10:13 pm
Re: Epoxy: To Evaporate and Blush or not to .....
LeeG -- 1/30/2002, 11:17 pm
Re: Epoxy: Good questions
don -- 1/30/2002, 10:48 pm
Re: Epoxy: To Evaporate and Blush or not to .....
Jon Murray -- 1/30/2002, 10:35 pm