Boat Building Forum

Find advice on all aspects of building your own kayak, canoe or any lightweight boats

Re: however
By:mike allen --->
Date: 1/31/2002, 6:38 pm
In Response To: Re: however (Pete Rudie)

: That isn't much of a surprise, given the fibrous nature of wood. The
: cellulose fibers act like tiny long straws, and capillary action
: transports fluids long distances in such conditions. Other factors are at
: work too, but it is largely capillary action that supplies the top of 300'
: trees with sap, after all. The lignin that binds the fibers together is
: relatively impervious to liquid water.

: The best that we can hope for, and what CPES apparently does, is go anyplace
: that water can go in the wood, encapsulate the walls of the fibers, and
: prevent the moisture content from reaching levels high enough for fungus
: spore germination. If CPES doesn't go sideways, then water doesn't either.
: That is an oversimplification of course; over time either one will find
: other pathways, but the path of least resistance will always be
: longitudinal.

yes, the pics in the pdf downloads that severne shows demonstrate all of this quite well. interesting photos.

Messages In This Thread

Epoxy: To Evaporate and Blush or not to .....
Joe -- 1/30/2002, 8:20 pm
Re: Epoxy: To Evaporate and Blush or not to .....
Steve Smith -- 2/1/2002, 4:38 pm
Thank you Mr. Smith
Pete Rudie -- 2/1/2002, 5:52 pm
Re: Epoxy: To Evaporate and Blush or not to .....
Jim Chowning -- 2/1/2002, 10:40 am
Thanks for the answer
Pete Rudie -- 2/1/2002, 12:09 pm
Re: Thanks for the answer
Jim Chowning/The Rot doctor -- 2/1/2002, 12:55 pm
Re: Thanks for the answer
LeeG -- 2/1/2002, 1:41 pm
Re: Thanks for the answer
Jim Chowning/The Rot doctor -- 2/2/2002, 12:31 pm
Re: Thanks for the answer *Pic*
Pete Rudie -- 2/2/2002, 1:46 pm
Re: Epoxy: To Evaporate and Blush or not to .....
Severne -- 1/31/2002, 11:52 am
Just when things looked clear...
Pete Rudie -- 1/31/2002, 9:31 pm
Re: Just when things looked clear...
Joe -- 2/1/2002, 3:01 am
Re: you are a reasonable guy
LeeG -- 1/31/2002, 10:52 pm
Only 1/32" Penetration ???.....
Joe -- 1/31/2002, 2:40 pm
Re: Greater Penetration
Chip Sandresky -- 2/1/2002, 12:45 pm
Re: Only 1/32" Penetration ???.....
Pete Rudie -- 1/31/2002, 2:56 pm
Re: Only 1/32" Penetration ???.....
Nick Schade - Guillemot Kayaks -- 2/1/2002, 10:54 am
Good point. And it IS Softwood. *NM*
Joe -- 2/1/2002, 11:11 am
however
mike allen ---> -- 1/31/2002, 3:05 pm
Re: however
Jim Chowning/The Rot doctor -- 2/1/2002, 7:36 pm
Re: however
Pete Rudie -- 1/31/2002, 6:22 pm
Re: however
mike allen ---> -- 1/31/2002, 6:38 pm
I asked Dr.Rot to come and answer us HERE!
Joe -- 1/31/2002, 4:45 pm
Re: I asked Dr.Rot to come and answer us HERE!
Nick Schade - Guillemot Kayaks -- 2/1/2002, 10:49 am
Re: Only 1/32" Penetration ???.....
LeeG -- 1/31/2002, 3:01 pm
It's not really blush .....
Pete Rudie -- 1/31/2002, 1:40 am
But could it be . . .
Paul G. Jacobson -- 1/31/2002, 10:33 pm
Good point,
Pete Rudie -- 1/31/2002, 11:50 pm
MORE than fair. Thanks *NM*
Joe -- 1/31/2002, 7:31 pm
Re: It's not really blush .....
Joe -- 1/31/2002, 3:04 am
Re: It's not really blush .....
LeeG -- 1/31/2002, 3:27 am
Re: Pure Speculation...
Nick Schade - Guillemot Kayaks -- 1/31/2002, 9:02 am
Re: Pure Speculation...
Tom Johansen -- 1/31/2002, 5:53 pm
Re: Pure Speculation...
LeeG -- 1/31/2002, 8:31 pm
Re: Pure Speculation...
Jim Chowning/The Rot doctor -- 2/1/2002, 2:01 pm
Re: Pure Speculation...
LeeG -- 2/1/2002, 5:17 pm
No speculation here...
Pete Rudie -- 1/31/2002, 6:15 pm
Dr. Rot replies ....
Joe -- 1/31/2002, 7:01 pm
Re: immaculate speculation
LeeG -- 1/31/2002, 2:56 pm
Limitations
Pete Rudie -- 1/31/2002, 11:21 am
Re: Limitations
Jim Chowning/The Rot doctor -- 2/1/2002, 1:49 pm
Re: Limitations
Nick Schade - Guillemot Kayaks -- 1/31/2002, 12:59 pm
Re: More Speculation...
Shawn Baker -- 1/31/2002, 10:46 am
Solving solvent worries
Paul G. Jacobson -- 1/30/2002, 10:50 pm
Re: Solving solvent worries
Joe -- 1/31/2002, 1:12 am
Re: Solving solvent worries
Jim Chowning/The Rot doctor -- 2/1/2002, 1:16 pm
Re: Epoxy: To Evaporate and Blush or not to .....
LeeG -- 1/30/2002, 8:54 pm
Re: Epoxy: To Evaporate and Blush or not to .....
Joe -- 1/30/2002, 10:13 pm
Re: Epoxy: To Evaporate and Blush or not to .....
LeeG -- 1/30/2002, 11:17 pm
Re: Epoxy: Good questions
don -- 1/30/2002, 10:48 pm
Re: Epoxy: To Evaporate and Blush or not to .....
Jon Murray -- 1/30/2002, 10:35 pm