Boat Building Forum

Find advice on all aspects of building your own kayak, canoe or any lightweight boats

Re: Only 1/32" Penetration ???.....
By:Nick Schade - Guillemot Kayaks
Date: 2/1/2002, 10:54 am
In Response To: Re: Only 1/32" Penetration ???..... (Pete Rudie)

: I was surprised by that too. The side grain of my WRC Greenland stick drank
: the stuff up within seconds. Severne watched it, was quite amazing really.
: Maybe Mr. Smith (to his credit) believes in the "Under-Promise but
: Over-Deliver" school of business marketing philosophy. IMHO his claim
: is extremely conservative. In my homegrown side by side comparison with S3
: Clear Coat, there was no comparison. CPES dove right inside the grain on
: Doug fir, and CC lay on the surface with very little penetration. I found
: that CC was really good at wetting out 4 oz. S-glass, a pretty tough job
: indeed, but it has nowhere near the penetrating ability of CPES into the
: wood fiber.

I am not surprised that the stuff won't penetrate far into side grain. There would need to be holes for the stuff to penetrate. However, true side grain doesn't happen that much. There is often some end grain exposed. This is probably why there is any penetration at all. The amount of penetration will depend on the angle of the grain.

Messages In This Thread

Epoxy: To Evaporate and Blush or not to .....
Joe -- 1/30/2002, 8:20 pm
Re: Epoxy: To Evaporate and Blush or not to .....
Steve Smith -- 2/1/2002, 4:38 pm
Thank you Mr. Smith
Pete Rudie -- 2/1/2002, 5:52 pm
Re: Epoxy: To Evaporate and Blush or not to .....
Jim Chowning -- 2/1/2002, 10:40 am
Thanks for the answer
Pete Rudie -- 2/1/2002, 12:09 pm
Re: Thanks for the answer
Jim Chowning/The Rot doctor -- 2/1/2002, 12:55 pm
Re: Thanks for the answer
LeeG -- 2/1/2002, 1:41 pm
Re: Thanks for the answer
Jim Chowning/The Rot doctor -- 2/2/2002, 12:31 pm
Re: Thanks for the answer *Pic*
Pete Rudie -- 2/2/2002, 1:46 pm
Re: Epoxy: To Evaporate and Blush or not to .....
Severne -- 1/31/2002, 11:52 am
Just when things looked clear...
Pete Rudie -- 1/31/2002, 9:31 pm
Re: Just when things looked clear...
Joe -- 2/1/2002, 3:01 am
Re: you are a reasonable guy
LeeG -- 1/31/2002, 10:52 pm
Only 1/32" Penetration ???.....
Joe -- 1/31/2002, 2:40 pm
Re: Greater Penetration
Chip Sandresky -- 2/1/2002, 12:45 pm
Re: Only 1/32" Penetration ???.....
Pete Rudie -- 1/31/2002, 2:56 pm
Re: Only 1/32" Penetration ???.....
Nick Schade - Guillemot Kayaks -- 2/1/2002, 10:54 am
Good point. And it IS Softwood. *NM*
Joe -- 2/1/2002, 11:11 am
however
mike allen ---> -- 1/31/2002, 3:05 pm
Re: however
Jim Chowning/The Rot doctor -- 2/1/2002, 7:36 pm
Re: however
Pete Rudie -- 1/31/2002, 6:22 pm
Re: however
mike allen ---> -- 1/31/2002, 6:38 pm
I asked Dr.Rot to come and answer us HERE!
Joe -- 1/31/2002, 4:45 pm
Re: I asked Dr.Rot to come and answer us HERE!
Nick Schade - Guillemot Kayaks -- 2/1/2002, 10:49 am
Re: Only 1/32" Penetration ???.....
LeeG -- 1/31/2002, 3:01 pm
It's not really blush .....
Pete Rudie -- 1/31/2002, 1:40 am
But could it be . . .
Paul G. Jacobson -- 1/31/2002, 10:33 pm
Good point,
Pete Rudie -- 1/31/2002, 11:50 pm
MORE than fair. Thanks *NM*
Joe -- 1/31/2002, 7:31 pm
Re: It's not really blush .....
Joe -- 1/31/2002, 3:04 am
Re: It's not really blush .....
LeeG -- 1/31/2002, 3:27 am
Re: Pure Speculation...
Nick Schade - Guillemot Kayaks -- 1/31/2002, 9:02 am
Re: Pure Speculation...
Tom Johansen -- 1/31/2002, 5:53 pm
Re: Pure Speculation...
LeeG -- 1/31/2002, 8:31 pm
Re: Pure Speculation...
Jim Chowning/The Rot doctor -- 2/1/2002, 2:01 pm
Re: Pure Speculation...
LeeG -- 2/1/2002, 5:17 pm
No speculation here...
Pete Rudie -- 1/31/2002, 6:15 pm
Dr. Rot replies ....
Joe -- 1/31/2002, 7:01 pm
Re: immaculate speculation
LeeG -- 1/31/2002, 2:56 pm
Limitations
Pete Rudie -- 1/31/2002, 11:21 am
Re: Limitations
Jim Chowning/The Rot doctor -- 2/1/2002, 1:49 pm
Re: Limitations
Nick Schade - Guillemot Kayaks -- 1/31/2002, 12:59 pm
Re: More Speculation...
Shawn Baker -- 1/31/2002, 10:46 am
Solving solvent worries
Paul G. Jacobson -- 1/30/2002, 10:50 pm
Re: Solving solvent worries
Joe -- 1/31/2002, 1:12 am
Re: Solving solvent worries
Jim Chowning/The Rot doctor -- 2/1/2002, 1:16 pm
Re: Epoxy: To Evaporate and Blush or not to .....
LeeG -- 1/30/2002, 8:54 pm
Re: Epoxy: To Evaporate and Blush or not to .....
Joe -- 1/30/2002, 10:13 pm
Re: Epoxy: To Evaporate and Blush or not to .....
LeeG -- 1/30/2002, 11:17 pm
Re: Epoxy: Good questions
don -- 1/30/2002, 10:48 pm
Re: Epoxy: To Evaporate and Blush or not to .....
Jon Murray -- 1/30/2002, 10:35 pm