Boat Building Forum

Find advice on all aspects of building your own kayak, canoe or any lightweight boats

Re: S&G: Fiberglassing the inside
By:Pete Rudie
Date: 2/1/2002, 11:52 am
In Response To: Re: S&G: Fiberglassing the inside (David Ross)

: God point. The kayak is 21 inches wide and hard chined. I believe the widest
: panel is about 9 inches or so right under my butt.
: Does anyone know how much of a weight difference I'm looking at?
: Thanks again.

In rough numbers for the hull there would be 1.5 lb. glass and another 1.5 lb. epoxy.

Messages In This Thread

S&G: Fiberglassing the inside
David Ross -- 2/1/2002, 8:41 am
Bullet proof philosophy
Pete Notman -- 2/3/2002, 3:38 pm
Re: composites, a good read
Dave Houser -- 2/1/2002, 3:30 pm
Re: composites, a good read
David Ross -- 2/1/2002, 8:03 pm
Re: S&G: Fiberglassing the inside
Myrl Tanton -- 2/1/2002, 1:11 pm
Re: S&G: Fiberglassing the inside
LeeG -- 2/1/2002, 10:29 am
Re: S&G: Fiberglassing the inside
David Ross -- 2/1/2002, 10:34 am
Re: S&G: Fiberglassing the inside
LeeG -- 2/1/2002, 1:36 pm
Re: S&G: Fiberglassing the inside
Pete Rudie -- 2/1/2002, 11:52 am