Boat Building Forum

Find advice on all aspects of building your own kayak, canoe or any lightweight boats

Re: You'll get those gaps tighter if
By:Dale Frolander
Date: 2/2/2002, 1:06 am
In Response To: Re: You'll get those gaps tighter if (daren neufeld)

: bungie cords work great! just drop a short piece of 1/4" dowel into the
: cove where the bungie cord crosses from outside to inside. one end of the
: cord is clamped to the shear strip. the tag end is clamped to a station
: form at whatever angle is required to hold the strip till the glue sets
: up.
: daren.....

Sounds good. You wouldn't have to buy tape all the time either as you could reuse the bungies over and over.

Messages In This Thread

Strip: Small gaps between strips
Dave S -- 2/1/2002, 9:08 pm
You'll get those gaps tighter if
Dale Frolander -- 2/1/2002, 9:36 pm
Re: You'll get those gaps tighter if
daren neufeld -- 2/1/2002, 10:10 pm
And to hold the bungee cords
Paul G. Jacobson -- 2/2/2002, 5:17 pm
Re: And to hold the bungee cords
daren neufeld -- 2/3/2002, 12:03 am
Re: You'll get those gaps tighter if
Rich D -- 2/2/2002, 8:44 am
Re: You'll get those gaps tighter if
Dale Frolander -- 2/2/2002, 1:06 am
Re: bungies over hull *Pic*
daren neufeld -- 2/3/2002, 9:54 am
Re: Strip: Small gaps between strips
Paul G. Jacobson -- 2/1/2002, 9:17 pm