: Is the hole spacing on the Keepers and Yakima footbraces the same? And, does
: anyone have the exact center to center measurements for them? I'm going to
: need to order whichever one I decide upon, but I'd like to get the
: t-nutted blocks glued into the cockpit soon, probably before they show up.

I'm with Pete on this one. It's very easy to use the rail as the template. I used "Ez-Point Studs" from Aircraft Spruce & Speciality that were designed to be epoxied directly to the boat which kept the rails as close to the hull as possible. I just put some clear packing tape on the back of the rail, put the studs into the rail, and glued them in place. Very simple.

John