: finished stripping hull and deck cut opening for cockpit. don't know how i
: missed it but there seems to be a slite bow in the hull and deck.the only
: way i can think to fix.is to remove strongback straighten hull(not quite
: sure how yet)glass inside first to hold shape,then glass outside. any help
: or comments welcome

It's not clear from your post whether you have a curved centerline/keel
Think viewed from above or sighting down the stations.

Or if you have a bump or blip in the surface, such as the wood has pulled away
from the station.

If it's a curved centerline, you're in deep do do. This would be hard to correct.

What did you use for a strongback?

Rob