: When I looked for my paint scraper I couldn't find it, so I went out to the
: car and grabbed the window scraper (I have one that has a soft metal
: blade) So thats what I have been using for scraping. I liked how it would
: actually bend slightly around the curves and would not dig in at all. The
: only problem is that it doesn't stay sharp.

: Tonight I purchased another paint scraper from the hardware store and gave it
: a try. I will be returning it as the blade is cupped so the outside edged
: did in. I took one pull with it and will have to do a little work to fix
: where it dug in a little on the deep side.

: Thanks again for all the input on final fill coats. When I get around to
: doing the final fill on the deck I will try your suggestions and let all
: know how it goes as I dispise sanding epoxy if it can be avoided. A quick
: scuff up is no problem, but I don't like having the epoxy dust in the
: house that comes from sanding out uneven coats and runs.

Nothing will stay sharp forever. Get a new metal file and touch of the scraper frequently. If you have a belt sander it will work to sharpen your scraper also. With a file or sander you can shape the scraper to meet your needs. Get used to sharpening, it is necessary makes everything work better.

: One more question for Nick: Do you clean the epoxy from your bristle brushes
: and reuse them, or do you toss them after each use?

I buy them by the case and toss them. They can be cleaned using white vinegar if you want to be more conservative.