Boat Building Forum

Find advice on all aspects of building your own kayak, canoe or any lightweight boats

Re: Strip: Internal strongback
By:Joe
Date: 2/28/2002, 10:34 am
In Response To: Re: Strip: Internal strongback (Ross Sieber)

Craig,

Out of the 2 choices you mention a 2"x4" seems better, but! At least pick the right 2"x4". If you went through the pile (most are just not grained tightly and straight and dry) and pick a dry tight grained one. But if I was going to use a 2"x4" I would go to a used building materials place (if you can find one where you live). There I would look for an OLD 2"x4" dry, tight grained and hopefully a real old one like an undressed one that will be a bigger dimension. In the old days a 2"x4" was undressed and depending how old could be 1 7/8" x 3 7/8" and will be tight grained and dry and HARD and through warping. Look for a good one no matter what, make sure it DRIES out FIRST and SUPPORT IT WELL. Good Luck.

Joe

Messages In This Thread

Strip: Internal strongback
Craig -- 2/28/2002, 8:44 am
Re: Strip: Internal strongback
Rod -- 3/1/2002, 11:56 am
I'm sure we can beat this one to death
Tom -- 3/1/2002, 8:33 pm
death throes
mike allen ---> -- 3/4/2002, 1:59 pm
Re: I'm sure we can beat this one to death
Don -- 3/2/2002, 11:17 am
Re: Strip: Internal strongback
Nick Schade - Guillemot Kayaks -- 3/1/2002, 9:18 am
Re: Strip: Internal strongback
Andy Waddington -- 3/1/2002, 4:14 am
Re: Strip: Internal strongback
Richard -- 2/28/2002, 10:54 pm
Re: Strip: Internal strongback
John Skinner -- 2/28/2002, 11:45 pm
Re: Strip: Internal strongback
Tom -- 2/28/2002, 10:43 pm
Re: Strip: Internal strongback
Ken -- 2/28/2002, 6:18 pm
Re: Strip: Internal strongback
Rob Macks -- 2/28/2002, 2:12 pm
Re: Strip: Internal strongback
Joe -- 2/28/2002, 2:30 pm
internal has its merrits too
Tom -- 2/28/2002, 11:01 pm
Re: internal has its merrits too
Scott Fitzgerrell -- 2/28/2002, 11:50 pm
Re: internal has its merrits too
Joe -- 3/1/2002, 1:19 am
Re: internal has its merrits too
Richard Boyle -- 3/1/2002, 9:21 am
Well said *NM*
Tom -- 3/1/2002, 8:04 pm
Re: Well said ....MAYBE ?
Joe -- 3/1/2002, 9:25 pm
Re: Well said ....MAYBE ?
Richard Boyle -- 3/2/2002, 10:13 am
Re: Well said ....MAYBE ?
Joe -- 3/1/2002, 11:07 pm
Re: Well said ....MAYBE ?
Tom -- 3/2/2002, 5:32 pm
Re: Well said ....MAYBE ?
Craig -- 3/2/2002, 7:49 pm
Re: Well said ....MAYBE ?
Joe -- 3/2/2002, 6:25 pm
Re: Strip: Internal strongback
Scott Fitzgerrell -- 2/28/2002, 1:06 pm
Re: Strip: Internal strongback
Ian -- 2/28/2002, 12:46 pm
Re: Strip: Internal strongback
Rob P -- 2/28/2002, 1:19 pm
Re: Strip: External Strongback
KenC -- 2/28/2002, 9:49 pm
Re: Strip: Internal strongback
jim kozel -- 2/28/2002, 11:48 am
Re: Strip: Internal strongback *Pic*
John Schroeder -- 2/28/2002, 1:43 pm
Re: Strip: Internal strongback
Bill Oetjen -- 2/28/2002, 11:19 am
Particle board
Brian Nystrom -- 2/28/2002, 12:38 pm
Re: Particle board
Joe -- 2/28/2002, 12:50 pm
Re: Strip: Internal strongback
Joe -- 2/28/2002, 12:23 pm
Re: MDF, OSB and Particle Board
Nick Schade - Guillemot Kayaks -- 3/1/2002, 9:39 am
Re: Strip: Internal strongback
Ross Sieber -- 2/28/2002, 10:01 am
Re: Strip: External strongback *Pic*
rick thomas -- 2/28/2002, 6:24 pm
Re: Strip: External strongback
Ross Sieber -- 2/28/2002, 6:40 pm
Re: Strip: Internal strongback
Joe -- 2/28/2002, 10:34 am
Re: Strip: Internal strongback
Paul G. Jacobson -- 2/28/2002, 9:33 am