Boat Building Forum

Find advice on all aspects of building your own kayak, canoe or any lightweight boats

Re: Strip: Internal strongback
By:Scott Fitzgerrell
Date: 2/28/2002, 1:06 pm
In Response To: Strip: Internal strongback (Craig)

: OK, it's time for The Plunge; the forms are here, the strips are here, and
: it's sawdust time for a Spring Run. For a number of reasons, I'm doing an
: internal strongback, but I want more rigidity than a simple 2x4. Planning
: on laminating 1/2" ply into a 2x3.5in beam, probably with vertical
: pieces topped and bottomed by a horizontal plate; should that be stiff
: enough to keep this newbie (first effort!) straight?
: Thanks in advance for any input!

: Craig

My concern would not be just sagging, but twisting and side-to-side bending as well. The plywood beam will resist these, including sagging, better than a 2x4. It's ply vs. solid wood, not a cross-sectional issue. As Tage Frid said, "wood will move." He wasn't talking about plywood. The 2x4 will react to every change in temp and humidity much more than the ply beam. Hard to build a good house without a good foundation. 2c.
--SF

Messages In This Thread

Strip: Internal strongback
Craig -- 2/28/2002, 8:44 am
Re: Strip: Internal strongback
Rod -- 3/1/2002, 11:56 am
I'm sure we can beat this one to death
Tom -- 3/1/2002, 8:33 pm
death throes
mike allen ---> -- 3/4/2002, 1:59 pm
Re: I'm sure we can beat this one to death
Don -- 3/2/2002, 11:17 am
Re: Strip: Internal strongback
Nick Schade - Guillemot Kayaks -- 3/1/2002, 9:18 am
Re: Strip: Internal strongback
Andy Waddington -- 3/1/2002, 4:14 am
Re: Strip: Internal strongback
Richard -- 2/28/2002, 10:54 pm
Re: Strip: Internal strongback
John Skinner -- 2/28/2002, 11:45 pm
Re: Strip: Internal strongback
Tom -- 2/28/2002, 10:43 pm
Re: Strip: Internal strongback
Ken -- 2/28/2002, 6:18 pm
Re: Strip: Internal strongback
Rob Macks -- 2/28/2002, 2:12 pm
Re: Strip: Internal strongback
Joe -- 2/28/2002, 2:30 pm
internal has its merrits too
Tom -- 2/28/2002, 11:01 pm
Re: internal has its merrits too
Scott Fitzgerrell -- 2/28/2002, 11:50 pm
Re: internal has its merrits too
Joe -- 3/1/2002, 1:19 am
Re: internal has its merrits too
Richard Boyle -- 3/1/2002, 9:21 am
Well said *NM*
Tom -- 3/1/2002, 8:04 pm
Re: Well said ....MAYBE ?
Joe -- 3/1/2002, 9:25 pm
Re: Well said ....MAYBE ?
Richard Boyle -- 3/2/2002, 10:13 am
Re: Well said ....MAYBE ?
Joe -- 3/1/2002, 11:07 pm
Re: Well said ....MAYBE ?
Tom -- 3/2/2002, 5:32 pm
Re: Well said ....MAYBE ?
Craig -- 3/2/2002, 7:49 pm
Re: Well said ....MAYBE ?
Joe -- 3/2/2002, 6:25 pm
Re: Strip: Internal strongback
Scott Fitzgerrell -- 2/28/2002, 1:06 pm
Re: Strip: Internal strongback
Ian -- 2/28/2002, 12:46 pm
Re: Strip: Internal strongback
Rob P -- 2/28/2002, 1:19 pm
Re: Strip: External Strongback
KenC -- 2/28/2002, 9:49 pm
Re: Strip: Internal strongback
jim kozel -- 2/28/2002, 11:48 am
Re: Strip: Internal strongback *Pic*
John Schroeder -- 2/28/2002, 1:43 pm
Re: Strip: Internal strongback
Bill Oetjen -- 2/28/2002, 11:19 am
Particle board
Brian Nystrom -- 2/28/2002, 12:38 pm
Re: Particle board
Joe -- 2/28/2002, 12:50 pm
Re: Strip: Internal strongback
Joe -- 2/28/2002, 12:23 pm
Re: MDF, OSB and Particle Board
Nick Schade - Guillemot Kayaks -- 3/1/2002, 9:39 am
Re: Strip: Internal strongback
Ross Sieber -- 2/28/2002, 10:01 am
Re: Strip: External strongback *Pic*
rick thomas -- 2/28/2002, 6:24 pm
Re: Strip: External strongback
Ross Sieber -- 2/28/2002, 6:40 pm
Re: Strip: Internal strongback
Joe -- 2/28/2002, 10:34 am
Re: Strip: Internal strongback
Paul G. Jacobson -- 2/28/2002, 9:33 am