Boat Building Forum

Find advice on all aspects of building your own kayak, canoe or any lightweight boats

Re: Strip: Internal strongback
By:John Skinner
Date: 2/28/2002, 11:45 pm
In Response To: Re: Strip: Internal strongback (Richard)

: I used a 2x4 to build a Guillemot. I had no problems at all with it, but I
: think it is important to bring it into your workspace a couple of weeks
: ahead of time and let it sit and dry out, if it shows no sign of warping
: by then, it should be fine. I think an internal strongback of plywood
: would be just as good. Also, take the time to build the stands shown in
: Nick's book, they will support the 2x4 in 4 places and do not get in the
: way at all of you working.
: Avoid particle board like the plague.
: Richard
this is probably the longest thread ive seen on strong backs. I followed nicks instructions on my guillemont, I used A good straight 2*4 I didnt have any noticeable problems in any direction 8 to 10 Hr set I think that you can over anylize things to death, or you can give it your best effort do alittle tweak here and there and see where the chips fall call it experience. I enjoy building very much but the Ideal is to get the boat in the water not the art mueseum. now Im going to build a spring run and I will follow the directions and build a external strong back and hopefully be in the water at the end may.
bottom line. do what you enjoy, enjoy what you do! Dont sweat the small stuff.

Messages In This Thread

Strip: Internal strongback
Craig -- 2/28/2002, 8:44 am
Re: Strip: Internal strongback
Rod -- 3/1/2002, 11:56 am
I'm sure we can beat this one to death
Tom -- 3/1/2002, 8:33 pm
death throes
mike allen ---> -- 3/4/2002, 1:59 pm
Re: I'm sure we can beat this one to death
Don -- 3/2/2002, 11:17 am
Re: Strip: Internal strongback
Nick Schade - Guillemot Kayaks -- 3/1/2002, 9:18 am
Re: Strip: Internal strongback
Andy Waddington -- 3/1/2002, 4:14 am
Re: Strip: Internal strongback
Richard -- 2/28/2002, 10:54 pm
Re: Strip: Internal strongback
John Skinner -- 2/28/2002, 11:45 pm
Re: Strip: Internal strongback
Tom -- 2/28/2002, 10:43 pm
Re: Strip: Internal strongback
Ken -- 2/28/2002, 6:18 pm
Re: Strip: Internal strongback
Rob Macks -- 2/28/2002, 2:12 pm
Re: Strip: Internal strongback
Joe -- 2/28/2002, 2:30 pm
internal has its merrits too
Tom -- 2/28/2002, 11:01 pm
Re: internal has its merrits too
Scott Fitzgerrell -- 2/28/2002, 11:50 pm
Re: internal has its merrits too
Joe -- 3/1/2002, 1:19 am
Re: internal has its merrits too
Richard Boyle -- 3/1/2002, 9:21 am
Well said *NM*
Tom -- 3/1/2002, 8:04 pm
Re: Well said ....MAYBE ?
Joe -- 3/1/2002, 9:25 pm
Re: Well said ....MAYBE ?
Richard Boyle -- 3/2/2002, 10:13 am
Re: Well said ....MAYBE ?
Joe -- 3/1/2002, 11:07 pm
Re: Well said ....MAYBE ?
Tom -- 3/2/2002, 5:32 pm
Re: Well said ....MAYBE ?
Craig -- 3/2/2002, 7:49 pm
Re: Well said ....MAYBE ?
Joe -- 3/2/2002, 6:25 pm
Re: Strip: Internal strongback
Scott Fitzgerrell -- 2/28/2002, 1:06 pm
Re: Strip: Internal strongback
Ian -- 2/28/2002, 12:46 pm
Re: Strip: Internal strongback
Rob P -- 2/28/2002, 1:19 pm
Re: Strip: External Strongback
KenC -- 2/28/2002, 9:49 pm
Re: Strip: Internal strongback
jim kozel -- 2/28/2002, 11:48 am
Re: Strip: Internal strongback *Pic*
John Schroeder -- 2/28/2002, 1:43 pm
Re: Strip: Internal strongback
Bill Oetjen -- 2/28/2002, 11:19 am
Particle board
Brian Nystrom -- 2/28/2002, 12:38 pm
Re: Particle board
Joe -- 2/28/2002, 12:50 pm
Re: Strip: Internal strongback
Joe -- 2/28/2002, 12:23 pm
Re: MDF, OSB and Particle Board
Nick Schade - Guillemot Kayaks -- 3/1/2002, 9:39 am
Re: Strip: Internal strongback
Ross Sieber -- 2/28/2002, 10:01 am
Re: Strip: External strongback *Pic*
rick thomas -- 2/28/2002, 6:24 pm
Re: Strip: External strongback
Ross Sieber -- 2/28/2002, 6:40 pm
Re: Strip: Internal strongback
Joe -- 2/28/2002, 10:34 am
Re: Strip: Internal strongback
Paul G. Jacobson -- 2/28/2002, 9:33 am