Boat Building Forum

Find advice on all aspects of building your own kayak, canoe or any lightweight boats

Re: Anti splinter plate?
By:John Schroeder
Date: 3/8/2002, 9:05 pm
In Response To: Anti splinter plate? (Brian Nystrom)

Interesting idea, Brian. :) How about making it from a scrap of plexiglas - that way you'll be able to see the cut line without needing to open up a bunch of area around the blade. Think I'll try it next time I'm cutting plywood with the sabre saw.

jrs

: Here's an idea of how it could be done: 1) Cut a piece of material
: to the size of the sole plate.

: 2) Mark a line down the center, then use your jig saw to cut a slot in the
: plate.

: 3) Slip the plate onto the base from behind, so that the slot faces forward
: and the blade is in the slot. Mark the location of the front of the blade.

: 4) Remove the plate and cut away some of the material from in front of the
: blade, so you can see your cut line as you work.

: 5) Apply double sided tape and attach the plate to the sole of your saw. Put
: the side with the smoothest cut suface downward, to give maximum support
: to the workpiece.

: 6) Go cut some plywood.

: Happy sawing!

: Brian

Messages In This Thread

Shop: Cutting Plywood - HELP!
Patsy -- 3/8/2002, 7:47 am
Re: Shop: Cutting Plywood - HELP!
jim kozel -- 3/8/2002, 11:05 pm
Bosch jig saws and Multi-Masters ROOL!
Brian Nystrom -- 3/11/2002, 1:03 pm
Re: Shop: Cutting Plywood - HELP!
Patsy -- 3/9/2002, 7:48 am
Re: Shop: Japan Woodworker Has Good Prices
Chip Sandresky -- 3/11/2002, 12:23 pm
Re: Shop: Cutting Plywood - HELP!
Don Beale -- 3/9/2002, 12:18 pm
Re: Shop: Cutting Plywood - HELP!
daren neufeld -- 3/9/2002, 9:53 am
Re: Shop: Cutting Plywood - HELP!
Charles Cooper -- 3/10/2002, 10:34 pm
Re: Shop: Cutting Plywood - HELP! *Pic*
John Monfoe -- 3/9/2002, 9:39 am
Re: Shop: Cutting Plywood - HELP!
Brian Nystrom -- 3/11/2002, 1:07 pm
Re: Shop: Cutting Plywood - HELP!
Richard Boyle -- 3/9/2002, 9:16 am
Re: Shop: Cutting Plywood - HELP!
Greg Morse -- 3/9/2002, 9:13 am
Re: Shop: Cutting Plywood - HELP!
daren neufeld -- 3/8/2002, 9:29 pm
Re: Shop: A tool-a-holics confession
Brent Curtis -- 3/8/2002, 10:36 pm
Re: Shop: A tool-a-holics confession
Patsy -- 3/9/2002, 7:45 am
Don't cheat yourself!
Brian Nystrom -- 3/11/2002, 12:56 pm
Re: Shop: A tool-a-holics confession
Robert Palmeter -- 3/9/2002, 4:26 pm
Re: Shop: A tool-a-holics confession
daren neufeld -- 3/8/2002, 10:55 pm
Anti splinter plate?
Brian Nystrom -- 3/8/2002, 3:39 pm
Re: Anti splinter plate?
Greg Morse -- 3/8/2002, 11:29 pm
Re: Anti splinter plate?
Brian Nystrom -- 3/11/2002, 12:49 pm
Re: Anti splinter plate?
Dick L. -- 3/8/2002, 9:08 pm
Re: Anti splinter plate?
Brian Nystrom -- 3/11/2002, 12:47 pm
Re: Anti splinter plate?
John Schroeder -- 3/8/2002, 9:05 pm
Re: Shop: Cutting Plywood - HELP!
Grant G -- 3/8/2002, 1:06 pm
Re: Shop: Cutting Plywood - HELP! *Pic*
Chip Sandresky -- 3/8/2002, 12:45 pm
Re: Shop: Cutting Plywood - HELP!
Ross Sieber -- 3/8/2002, 11:21 am
Re: Shop: Cutting Plywood - HELP!
Eric -- 3/8/2002, 9:38 am
Re: Shop: Cutting Plywood - HELP!
James Neely -- 3/8/2002, 11:13 am
knife blade for jigsaw??
mike allen ---> -- 3/8/2002, 2:35 pm
Re: knife blade for jigsaw??
Paul G. Jacobson -- 3/8/2002, 7:52 pm
Heck No! Use a "Stanley Knife"
James Neely -- 3/8/2002, 5:06 pm
Re: Shop: Cutting Plywood - HELP!
Phil -- 3/8/2002, 9:34 am
Re: Shop: Cutting Plywood - HELP!
Rob Macks -- 3/8/2002, 9:33 am
Re: Shop: Cutting Plywood - HELP!
Rehd -- 3/8/2002, 9:25 am
Re: Shop: Cutting Plywood - HELP!
leo s -- 3/8/2002, 8:54 am
Re: Shop: Cutting Plywood - HELP!
KenC -- 3/8/2002, 8:20 am
Re: packing tape and planes
Dave Houser -- 3/8/2002, 3:58 pm
Re: Shop: Cutting Plywood - HELP!
Elliott -- 3/8/2002, 8:03 am