Boat Building Forum

Find advice on all aspects of building your own kayak, canoe or any lightweight boats

Re: Shop: Cutting Plywood - HELP!
By:Patsy
Date: 3/9/2002, 7:48 am
In Response To: Re: Shop: Cutting Plywood - HELP! (jim kozel)

OK, I'm going to need some help on this Japanese pull saw thing. I went to Woodcraft and they have about a dozen to choose from, most of which are well over $45. More like $60. The one that sounds right for what I'm doing is the Kataba 12" blade with 17TPI and 39" kerf. It's $60. Which one should I get if I'm trying not to spend more than I have to?

Patsy

: Hi Patsy -
: Hopefully you are bracing and clamping the plywood to Workmates or saw
: horses. If you're still getting tear-out with the proper blade, just don't
: use that jigsaw. I purchased the Bosch jig-saw and it does a wonderful
: job, so does a nifty tool called the Fein Multi-master. The downside is
: both tools will set you back almost $200 each. That's alot to spend if you
: won't use them for other projects. The suggestion about the Japanese
: pull-saw was excellent. You should get one anyway, you'll use it lots
: during your project and they can be purchased for less than $45. Woodcraft
: sells them. I second the notion that it will be almost as fast as a
: jig-saw AND NO NOISE! It's very easy to make precise cuts with a pull-saw.
: There are some "pull-saws" sold at home depot, not the real
: thing.

Messages In This Thread

Shop: Cutting Plywood - HELP!
Patsy -- 3/8/2002, 7:47 am
Re: Shop: Cutting Plywood - HELP!
jim kozel -- 3/8/2002, 11:05 pm
Bosch jig saws and Multi-Masters ROOL!
Brian Nystrom -- 3/11/2002, 1:03 pm
Re: Shop: Cutting Plywood - HELP!
Patsy -- 3/9/2002, 7:48 am
Re: Shop: Japan Woodworker Has Good Prices
Chip Sandresky -- 3/11/2002, 12:23 pm
Re: Shop: Cutting Plywood - HELP!
Don Beale -- 3/9/2002, 12:18 pm
Re: Shop: Cutting Plywood - HELP!
daren neufeld -- 3/9/2002, 9:53 am
Re: Shop: Cutting Plywood - HELP!
Charles Cooper -- 3/10/2002, 10:34 pm
Re: Shop: Cutting Plywood - HELP! *Pic*
John Monfoe -- 3/9/2002, 9:39 am
Re: Shop: Cutting Plywood - HELP!
Brian Nystrom -- 3/11/2002, 1:07 pm
Re: Shop: Cutting Plywood - HELP!
Richard Boyle -- 3/9/2002, 9:16 am
Re: Shop: Cutting Plywood - HELP!
Greg Morse -- 3/9/2002, 9:13 am
Re: Shop: Cutting Plywood - HELP!
daren neufeld -- 3/8/2002, 9:29 pm
Re: Shop: A tool-a-holics confession
Brent Curtis -- 3/8/2002, 10:36 pm
Re: Shop: A tool-a-holics confession
Patsy -- 3/9/2002, 7:45 am
Don't cheat yourself!
Brian Nystrom -- 3/11/2002, 12:56 pm
Re: Shop: A tool-a-holics confession
Robert Palmeter -- 3/9/2002, 4:26 pm
Re: Shop: A tool-a-holics confession
daren neufeld -- 3/8/2002, 10:55 pm
Anti splinter plate?
Brian Nystrom -- 3/8/2002, 3:39 pm
Re: Anti splinter plate?
Greg Morse -- 3/8/2002, 11:29 pm
Re: Anti splinter plate?
Brian Nystrom -- 3/11/2002, 12:49 pm
Re: Anti splinter plate?
Dick L. -- 3/8/2002, 9:08 pm
Re: Anti splinter plate?
Brian Nystrom -- 3/11/2002, 12:47 pm
Re: Anti splinter plate?
John Schroeder -- 3/8/2002, 9:05 pm
Re: Shop: Cutting Plywood - HELP!
Grant G -- 3/8/2002, 1:06 pm
Re: Shop: Cutting Plywood - HELP! *Pic*
Chip Sandresky -- 3/8/2002, 12:45 pm
Re: Shop: Cutting Plywood - HELP!
Ross Sieber -- 3/8/2002, 11:21 am
Re: Shop: Cutting Plywood - HELP!
Eric -- 3/8/2002, 9:38 am
Re: Shop: Cutting Plywood - HELP!
James Neely -- 3/8/2002, 11:13 am
knife blade for jigsaw??
mike allen ---> -- 3/8/2002, 2:35 pm
Re: knife blade for jigsaw??
Paul G. Jacobson -- 3/8/2002, 7:52 pm
Heck No! Use a "Stanley Knife"
James Neely -- 3/8/2002, 5:06 pm
Re: Shop: Cutting Plywood - HELP!
Phil -- 3/8/2002, 9:34 am
Re: Shop: Cutting Plywood - HELP!
Rob Macks -- 3/8/2002, 9:33 am
Re: Shop: Cutting Plywood - HELP!
Rehd -- 3/8/2002, 9:25 am
Re: Shop: Cutting Plywood - HELP!
leo s -- 3/8/2002, 8:54 am
Re: Shop: Cutting Plywood - HELP!
KenC -- 3/8/2002, 8:20 am
Re: packing tape and planes
Dave Houser -- 3/8/2002, 3:58 pm
Re: Shop: Cutting Plywood - HELP!
Elliott -- 3/8/2002, 8:03 am