: I am building a Nimrod 12 canoe ( a Platt Monfort design)
: and need to find the right wood for the frame and ribs.

: I am looking for input on using spruce for the frame and
: can I get away with using kiln dried spruce lumber from
: the local Home Depot ?

: will I be able to soak and steam it enough to bend it?

: or do I have to use air dried lumber only ?

: if I have to use air dried, do does anyone know of a source north or Boston?

: thanks
: addison

What woods and materials do the plans call for? Why not follow the suggstions,
They probably have a lot of experience behind them.

Go out and get a couple books on steam bending so you'll get the whole picture
on what it's all about and how to do it right the first time.

There are a lot of factors and theory that make a world of difference. If you take
the time to learn them you will be wildly amazed at how successful you will be.

Succeeding at the first try is inspiring.

Hell, you can do a net search on steam bending and not leave home.

There IS magic to making things. There are woods, materials and techniques
that do things you would never imagine. This is the magic.

It takes a little study to find the solid facts
of the tricks of the trade.

All the best,

Rob Macks
Laughing Loon CC&K
www.LaughingLoon.com