Boat Building Forum

Find advice on all aspects of building your own kayak, canoe or any lightweight boats

Re: Hey now...
By:Don Beale
Date: 3/25/2002, 1:32 am

Actually, I was trying to figure out where that loogie came from :)

Seriously, it will be a good time. We'll have solid or hollow core core blanks for you if you order them ahead.

: Don Beale will be leading a paddle-building workshop at SSTIKS 2002. Learn
: the secrets of making his beautiful ultralight Greenland-style paddles,
: and make a paddle of your own in the workshop. There will be some tools
: there, but bring your own block plane and/or spokeshave if you can.

: For you skin-on-frame nuts (self included) there will be plenty of cool skin
: kayaks. Other kayaks (stippers, S&G, glass, and tupperware) are welcome
: too. Joe said he will probably have the King there.

: There will also be all sorts of Greenland-technique demos and workshops for
: those interested in actual on the water experience, but this is just a
: side note, because everyone here is just interested in building, right? ;)
: If you haven't seen one of these guys do their rolling demos, then you
: need to come just for that! If you've seen it before, then come to learn
: how to do it yourself. We plan to have lots of hands-on training.

: You don't have to be a Greenland paddler to come, but you will learn what all
: the fuss is about.

: The pic below is of master paddle builder Don, sizing up a paddle at R2K1.

: Hope to see you all there, and bring your Greenland sticks if you have them.

: Mike Hanks
: SSTIKS 2002 Event Coordinator

Messages In This Thread

Announce: SSTIKS 2002 Paddle building workshop *Pic*
Mike Hanks -- 3/22/2002, 11:45 am
Re: Hey now...
Don Beale -- 3/25/2002, 1:32 am