Boat Building Forum

Find advice on all aspects of building your own kayak, canoe or any lightweight boats

Re: Material: Which varnish and how much?
By:daren neufeld
Date: 3/31/2002, 8:28 am
In Response To: Material: Which varnish and how much? (Rich D)

i just varnished my spring run this weekend. one quart gave me four good coats, with a couple teaspoons to spare. i've had great success helmsman spar varnish by minwax, and it's a lot cheaper than z-spar or epifanes.
i used satin finish on my first boat and didn't like it so i lightly sanded it and re-did it with gloss.
others on the board have used helmsman as well, with great results.
hope that helps;
daren......

Messages In This Thread

Material: Which varnish and how much?
Rich D -- 3/30/2002, 1:24 pm
Re: Material: Which varnish and how much?
Rob Macks -- 3/31/2002, 2:41 pm
Re: Material: Which varnish and how much?
LeeG -- 3/31/2002, 10:02 am
Re: Material: Which varnish and how much?
daren neufeld -- 3/31/2002, 8:28 am
Re: Material: Which varnish and how much?
Greg Hughes -- 3/31/2002, 6:31 am
Re: how much varnish
Rod Tait -- 3/30/2002, 3:35 pm
Re: Material: Which varnish and how much?
Robert -- 3/30/2002, 2:32 pm
Re: yellow tint, and storage
Don Beale -- 3/31/2002, 12:03 pm
C O two, a sealing brew, direct to you.
Paul G. Jacobson -- 4/1/2002, 10:45 pm
Re: Molotov cocktails :)
Don Beale -- 4/2/2002, 11:38 am
Re: or.....
daren neufeld -- 4/1/2002, 11:18 pm
Clear, untinted varnish
Gini -- 4/1/2002, 9:57 am
Re: yellow tint, and storage
Robert -- 3/31/2002, 6:29 pm
fitting a paddle is like fitting shoes
Paul G. Jacobson -- 4/2/2002, 12:44 am
Re: fitting a paddle like changing gears
jim kozel -- 4/2/2002, 8:40 am
Re: fitting a paddle like changing gears
Robert -- 4/2/2002, 10:36 am
Re: fitting a paddle like changing gears
risto -- 4/2/2002, 12:08 pm
Re: fitting a paddle like changing gears
Robert -- 4/2/2002, 3:18 pm
Re: fitting a paddle like changing gears
risto -- 4/3/2002, 11:13 am
Re: paddles
Don Beale -- 4/1/2002, 4:38 pm