Boat Building Forum

Find advice on all aspects of building your own kayak, canoe or any lightweight boats

Re: Strip: Stripping Magic!! *Pic*
By:Bobby Curtis
Date: 4/3/2002, 8:26 am
In Response To: Strip: Stripping Magic!! (Rob Macks)

Rob

I used a heat gun to bend some difficult strips. I also wrapped a wet towel around the strip to prevent the strip from being burned. I made the bend, but had to use staples to hold it in place. I used 1/4” thick x 3/4” wide western red cedar strips.

Bobby

Sea Spirit Kayaks

Messages In This Thread

Strip: Stripping Magic!!
Rob Macks -- 4/3/2002, 8:05 am
an idea
mike allen ---> -- 4/3/2002, 6:01 pm
Re: an idea
Tom -- 4/3/2002, 10:18 pm
Re: an idea
Roy Morford -- 4/6/2002, 9:27 pm
Re: Strip: Stripping Magic!!
Tom -- 4/3/2002, 5:09 pm
Re: Strip: Thanks for the info Rob :) *NM*
Roger Nuffer -- 4/3/2002, 9:35 am
Re: Strip: Stripping Magic!! *Pic*
Bobby Curtis -- 4/3/2002, 8:26 am