Boat Building Forum

Find advice on all aspects of building your own kayak, canoe or any lightweight boats

other fences
By:mike allen --->
Date: 4/24/2002, 6:26 pm
In Response To: Re: S&G: try again (Severne)

: Screw the plane to the 45 degree surface so that the plane overhangs the edge
: of the wood and the plane blade fits into the grrove.

1/what abt using just the ctr portion of the blade and affixing 2 fences, one on ea side that leave abt say 1/4 in of blade showing right down the centre. then it'll work both ways

2/or the opposite, if say the plane is 2 in wide, what about putting a 45 angle cut true 1"x1" right down the centrline of the plane(it'll be abt 1 1/2in wide leaving 1/4 in of blade ea side of the plane. then can cut both ways on that. or if want huger fence, just one big screw in the middle and rotate the offset big fence on the screw/bolt when ever you want the other direction, say leaving abt 1/2 in exposed on only the one side

3/of what if want rolling bevels and put say 1" half round on ctr bottom as an edge guide and make the rolling bevels using that as a retainer for those extremely curvy s&g's

-mick

Messages In This Thread

S&G: Beveling edges of plywood
Patsy -- 4/23/2002, 1:33 pm
Re: S&G: Beveling edges of plywood
Rehd -- 4/23/2002, 10:42 pm
Re: S&G: Beveling edges of plywood
Patsy -- 4/24/2002, 9:17 am
I heard about an interesting S&G trick recently
Brian Nystrom -- 4/24/2002, 12:27 pm
Re: I heard about an interesting S&G trick recentl
mike allen ---> -- 4/24/2002, 2:17 pm
Re: I heard about an interesting S&G trick recentl
Patsy -- 4/24/2002, 1:27 pm
Re:Planing a bevel
jim kozel -- 4/24/2002, 2:34 pm
Re:Planing a bevel
Patsy -- 4/24/2002, 3:12 pm
Re:Planing a bevel
jim kozel -- 4/24/2002, 4:02 pm
Re:Planing a bevel
Paul G. Jacobson -- 4/24/2002, 10:52 pm
Re:Planing a bevel
jim kozel -- 4/25/2002, 1:32 pm
Re:Planing a bevel
Patsy -- 4/24/2002, 4:17 pm
playing games
mike allen ---> -- 4/24/2002, 3:04 pm
more edge patter
mike allen ---> -- 4/24/2002, 4:26 pm
Re: S&G: Beveling edges of plywood
Don Lucas -- 4/24/2002, 10:22 am
Re: S&G: Beveling edges of plywood
LeeG -- 4/23/2002, 4:04 pm
Re: S&G: Beveling edges of plywood
Patsy -- 4/23/2002, 4:26 pm
Re: S&G: Beveling edges of plywood
LeeG -- 4/23/2002, 4:38 pm
Re: S&G: Bevel-Sandpaper?
John B. -- 4/23/2002, 8:25 pm
Re: S&G: Bevel-Sandpaper?
LeeG -- 4/24/2002, 1:05 pm
Re: S&G: Bevel-Sandpaper?
Patsy -- 4/24/2002, 3:16 pm
Re: S&G: Bevel-Sandpaper?
Paul G. Jacobson -- 4/24/2002, 9:51 pm
Re: S&G: Beveling edges of plywood
Myrl Tanton -- 4/23/2002, 3:27 pm
Re: S&G: Beveling edges of plywood
Patsy -- 4/23/2002, 3:39 pm
Re: S&G: Beveling edges of plywood
Myrl Tanton -- 4/23/2002, 3:59 pm
Re: S&G: Beveling edges of plywood
Severne -- 4/23/2002, 3:02 pm
Re: S&G: Beveling edges of plywood
Severne -- 4/23/2002, 8:04 pm
Re: S&G: try again
Severne -- 4/23/2002, 8:08 pm
other fences
mike allen ---> -- 4/24/2002, 6:26 pm
i apologize
mike allen ---> -- 4/24/2002, 7:41 pm
Re: S&G: try again
Patsy -- 4/24/2002, 9:20 am
Re: S&G: Beveling edges of plywood
Patsy -- 4/23/2002, 3:21 pm
Re: S&G: Beveling edges of plywood
Chip Sandresky -- 4/23/2002, 2:38 pm
Re: S&G: Beveling edges of plywood
Kurt Loup, Baton Rouge -- 4/23/2002, 1:50 pm