Boat Building Forum

Find advice on all aspects of building your own kayak, canoe or any lightweight boats

i apologize
By:mike allen --->
Date: 4/24/2002, 7:41 pm
In Response To: other fences (mike allen --->)

on 2nd thought, inside curves using planes would be a bitch as the plane bed will be raised from the work and it would be tough to control.

(the use of sand paper blocks or flat files or fine rasps would be more controllable. that's the way i dealt w/ tough rolling curve on a stripper.)

if the plane idea works for gentle curves, the most useful fence might be a 1"diam cylinder w/ one end bevelled 45deg (or 1/2 of whatever the tightest edge is) and w/ the end bolted on the c/l of the plane. then you can turn the guide around from 45 deg bevel thru all angles to 90 deg to negative 45deg on the other side - any angle in between that you want.

Messages In This Thread

S&G: Beveling edges of plywood
Patsy -- 4/23/2002, 1:33 pm
Re: S&G: Beveling edges of plywood
Rehd -- 4/23/2002, 10:42 pm
Re: S&G: Beveling edges of plywood
Patsy -- 4/24/2002, 9:17 am
I heard about an interesting S&G trick recently
Brian Nystrom -- 4/24/2002, 12:27 pm
Re: I heard about an interesting S&G trick recentl
mike allen ---> -- 4/24/2002, 2:17 pm
Re: I heard about an interesting S&G trick recentl
Patsy -- 4/24/2002, 1:27 pm
Re:Planing a bevel
jim kozel -- 4/24/2002, 2:34 pm
Re:Planing a bevel
Patsy -- 4/24/2002, 3:12 pm
Re:Planing a bevel
jim kozel -- 4/24/2002, 4:02 pm
Re:Planing a bevel
Paul G. Jacobson -- 4/24/2002, 10:52 pm
Re:Planing a bevel
jim kozel -- 4/25/2002, 1:32 pm
Re:Planing a bevel
Patsy -- 4/24/2002, 4:17 pm
playing games
mike allen ---> -- 4/24/2002, 3:04 pm
more edge patter
mike allen ---> -- 4/24/2002, 4:26 pm
Re: S&G: Beveling edges of plywood
Don Lucas -- 4/24/2002, 10:22 am
Re: S&G: Beveling edges of plywood
LeeG -- 4/23/2002, 4:04 pm
Re: S&G: Beveling edges of plywood
Patsy -- 4/23/2002, 4:26 pm
Re: S&G: Beveling edges of plywood
LeeG -- 4/23/2002, 4:38 pm
Re: S&G: Bevel-Sandpaper?
John B. -- 4/23/2002, 8:25 pm
Re: S&G: Bevel-Sandpaper?
LeeG -- 4/24/2002, 1:05 pm
Re: S&G: Bevel-Sandpaper?
Patsy -- 4/24/2002, 3:16 pm
Re: S&G: Bevel-Sandpaper?
Paul G. Jacobson -- 4/24/2002, 9:51 pm
Re: S&G: Beveling edges of plywood
Myrl Tanton -- 4/23/2002, 3:27 pm
Re: S&G: Beveling edges of plywood
Patsy -- 4/23/2002, 3:39 pm
Re: S&G: Beveling edges of plywood
Myrl Tanton -- 4/23/2002, 3:59 pm
Re: S&G: Beveling edges of plywood
Severne -- 4/23/2002, 3:02 pm
Re: S&G: Beveling edges of plywood
Severne -- 4/23/2002, 8:04 pm
Re: S&G: try again
Severne -- 4/23/2002, 8:08 pm
other fences
mike allen ---> -- 4/24/2002, 6:26 pm
i apologize
mike allen ---> -- 4/24/2002, 7:41 pm
Re: S&G: try again
Patsy -- 4/24/2002, 9:20 am
Re: S&G: Beveling edges of plywood
Patsy -- 4/23/2002, 3:21 pm
Re: S&G: Beveling edges of plywood
Chip Sandresky -- 4/23/2002, 2:38 pm
Re: S&G: Beveling edges of plywood
Kurt Loup, Baton Rouge -- 4/23/2002, 1:50 pm