Boat Building Forum
Find advice on all aspects of building your own kayak, canoe or any lightweight boats
Re: S&G: Stitching and Canoe Progress Report
By:David Hanson
Date: 4/29/2002, 10:02 am
Date: 4/29/2002, 10:02 am
In Response To: S&G: Stitching and Canoe Progress Report (Patsy)
I built a S&G sailboat dingy and I position the two adjoining pieces together and drilled them at the same time. On the curves the holes were closer than on the straight areas. Like 5" down to 3".
Stitched them up loosely and then open the two pieces up gently till the bulkheads fit. If your canoe does not have bulkheads you might make some temporary ones for allignment.
Messages In This Thread
- S&G: Stitching and Canoe Progress Report
Patsy -- 4/29/2002, 8:28 am- Measure twice, etc.
Paul G. Jacobson -- 4/29/2002, 6:04 pm- Re: Measure twice, etc.
Patsy -- 4/30/2002, 8:35 am- Re: Measure twice, etc.
mike allen ---> -- 4/29/2002, 6:59 pm - Re: Measure twice, etc.
- Re: S&G: Stitching and Canoe Progress Report
Myrl Tanton -- 4/29/2002, 11:27 am- Re: S&G: Stitching and Canoe Progress Report
David Hanson -- 4/29/2002, 10:02 am - Re: Measure twice, etc.
- Measure twice, etc.
