Boat Building Forum
Find advice on all aspects of building your own kayak, canoe or any lightweight boats
Re: Epoxy: When to varnish?
By:Rob Macks
Date: 5/1/2002, 12:04 am
Date: 5/1/2002, 12:04 am
In Response To: Epoxy: When to varnish? (mark)
: Hello,
: I have sanded the third coat of epoxy on the hull(S/G) and there are
: semi-faint white checkerboard patterns, the surface is smooth though. Does
: it need more epoxy??
Yes, If you apply only one coat you may sand right back where you are now.
I'd suggest applying two coats of rolled on resin.
The surface will be quite smooth and you can start sanding with 120 then 220
and varnish.
Rob
Messages In This Thread
- Epoxy: When to varnish?
mark -- 4/30/2002, 8:10 pm- Re: Epoxy: When to varnish?
Rob Macks -- 5/1/2002, 12:04 am
- Re: Epoxy: When to varnish?
