Re: Tools: Whatsamatterwithmyplane?
In Response To: Tools: Whatsamatterwithmyplane? (Patsy)
: I'm trying to plane the outside edges of two pieces of plywood to the same
: size and at best I get very, very skinny (like a mm) shavings and at worst
: it just slides over the wood and cuts nothing. If I stick the blade out
: far enough to actually cut, then there is no gap for the shavings to go
: through and they just jam up under the blade. I've adjusted and adjusted
: and adjusted and nothing seems to make any difference.
Does your plane have an adjustable throat opening? Does the front have a little knob handle that with a lever under it? If so you can loosen the handle knob and slide the lever to open and close the opening on the bottom.
Messages In This Thread
- Tools: Whatsamatterwithmyplane?
Patsy -- 5/1/2002, 7:58 am- Re: Tools: Whatsamatterwithmyplane?
Don Lucas -- 5/1/2002, 7:42 pm- Re: Tools: Whatsamatterwithmyplane?
Patsy -- 5/2/2002, 12:24 pm- Re: Tools: Whatsamatterwithmyplane?
Brian Nystrom -- 5/2/2002, 1:34 pm
- Re: Tools: Whatsamatterwithmyplane?
- Re: Tools: Whatsamatterwithmyplane?
Scott e. Davis -- 5/1/2002, 1:59 pm- Re: Tools: Whatsamatterwithmyplane?
Myrl Tanton -- 5/1/2002, 2:37 pm
- Re: Tools: Whatsamatterwithmyplane?
Rob Macks -- 5/1/2002, 10:16 am- Re: Tools: Whatsamatterwithmyplane?
Myrl Tanton -- 5/1/2002, 11:41 am- Re: Tools: Whatsamatterwithmyplane?
Rob Macks -- 5/1/2002, 12:16 pm- Block planes - extra sharpening care
Dave Houser -- 5/1/2002, 4:00 pm
- Block planes - extra sharpening care
- Re: Tools: Whatsamatterwithmyplane?
Patsy -- 5/1/2002, 10:43 am - Re: Tools: Whatsamatterwithmyplane?
- Re: Tools: Whatsamatterwithmyplane?
Nick Schade - Guillemot Kayaks -- 5/1/2002, 8:51 am- Re: Tools: Whatsamatterwithmyplane?
Patsy -- 5/1/2002, 9:03 am
- Re: Tools: Whatsamatterwithmyplane?
steve hartmann -- 5/1/2002, 8:13 am- Re: Tools: Nuttin'
Rehd -- 5/1/2002, 8:54 am- Re: Tools: Nuttin'
Patsy -- 5/1/2002, 9:09 am- Re: Concave Cuts Need a Convex Spokeshave
Chip Sandresky -- 5/1/2002, 1:05 pm
- Re: Concave Cuts Need a Convex Spokeshave
- Re: Tools: Whatsamatterwithmyplane?
Patsy -- 5/1/2002, 8:47 am - Re: Tools: Nuttin'
- Re: Tools: Whatsamatterwithmyplane?
- Re: Tools: Whatsamatterwithmyplane?