Boat Building Forum

Find advice on all aspects of building your own kayak, canoe or any lightweight boats

Re: Heresy!
By:Joe Greenley
Date: 5/9/2002, 8:32 pm
In Response To: Heresy! *Pic* (Charles Cooper)

Hello Coop,
I think you mean the pump stroke ratio is 1:1
The pumps sent with the epoxy are calibrated - the resin pump dispenses exactly twice the volume per stroke that the hardener pump dispenses.
In other words, the pump stroke ratio is 1:1 and the volume dispensed ratio is 2:1
Joe

: 2: I use MAS epoxy.
: MAS epoxy uses a 1:1 ratio between the resin and hardner.

Messages In This Thread

Epoxy: Measuring Resin and hardener
Ray -- 5/8/2002, 9:52 am
Wow - Thanks all....
Ray -- 5/8/2002, 7:07 pm
Heresy! *Pic*
Charles Cooper -- 5/9/2002, 12:46 pm
Re: Heresy!
Joe Greenley -- 5/9/2002, 8:32 pm
Re: booboos
LeeG -- 5/10/2002, 12:18 am
Re: booboos
Charles Cooper -- 5/10/2002, 6:57 am
Re: booboos
LeeG -- 5/10/2002, 9:45 am
Re: booboos
Rich D -- 5/10/2002, 9:46 pm
Re: Heresy! Always 1:1 Ratio????
John B. -- 5/9/2002, 7:18 pm
Re: Wow - Thanks all....
BruceK -- 5/8/2002, 10:25 pm
Easy marking of throw away cups
Dave Houser -- 5/8/2002, 4:15 pm
also, some further ideas:
mike allen ---> -- 5/8/2002, 4:34 pm
Re: Epoxy: Measuring Resin and hardener
Rick Hastings -- 5/8/2002, 3:06 pm
Re: Epoxy: Measuring Resin and hardener
Chip Sandresky -- 5/8/2002, 1:54 pm
Re: Epoxy: Measuring Resin and hardener
KenB -- 5/8/2002, 1:06 pm
Re: Epoxy: Measuring Resin and hardener
Jim Kozel -- 5/8/2002, 11:43 am
Re: Measuring Resin - make your own
Rod Tait -- 5/8/2002, 10:19 am