Boat Building Forum

Find advice on all aspects of building your own kayak, canoe or any lightweight boats

Re: Tools: table saw and air cleaner recommendatio
By:greg root
Date: 8/22/2002, 6:41 pm

: Three words you wrote stuck with me. "Least expensive"
: "winter" "limited space".

: I don't think Norm Abrams would rip strips inside. You want to rip outside
: and share the dust with the neighbors. I've ripped in the dead of winter
: in my driveway with a mask on. I had to stop a few times to go inside and
: warm my fingers. But in a few hours you're done and I use the leaf blower
: to send the dust down the street and clean the saw.

: Sounds like you want just enough of a saw to get the job done and no more.
: You can do a good job with a circular saw mounted under a table. Since you
: don't need the bells and whistles for the ripping job you're doing other
: than a fence and finger boards, you can fasten a straight piece of wood
: for that. A 7 1/4 blade works good too.

: Those little $185 table saws are terrible. You can do better with the
: circular saw on a big old table. Naturally a stronger saw will do better
: than a $19. one.
Jay-A circular saw mounted under a table-an intriguing idea, and I happen to have a good Makita circular saw; how would I go about doing it? Thanks, Greg

Messages In This Thread

Tools: table saw and air cleaner recommendations
greg root -- 8/21/2002, 10:48 am
Re: Tools: table saw and air cleaner recommendatio
Jay Babina -- 8/22/2002, 3:41 pm
Re: Tools: table saw and air cleaner recommendatio
greg root -- 8/22/2002, 6:41 pm
Re: Tools: Cheap Table Saw, Home-Made
Rehd -- 8/23/2002, 1:37 am
circ saw as table saw
mike allen -- 8/26/2002, 8:32 pm
Re: circ saw as table saw
Gary -- 1/11/2003, 1:00 pm
Jay, Paul and Rehd-Thanks!
greg root -- 8/23/2002, 8:18 am
making a table for a circular saw .
Paul G. Jacobson -- 8/23/2002, 1:02 am
and let me add.
Paul G. Jacobson -- 8/23/2002, 8:28 pm
Re: and let me add.
jimkozel -- 8/23/2002, 10:59 pm
good point
Paul G. Jacobson -- 8/23/2002, 11:57 pm
local high school/ Community college wood shop
Tony -- 8/21/2002, 4:01 pm
Recent table saw lessons learned
Brian Nystrom -- 8/21/2002, 1:27 pm
Re: Tools: table saw and air cleaner recommendatio
Kurt Loup, Baton Rouge -- 8/21/2002, 12:02 pm
Re: Tools: thanks!
Ross Leidy -- 8/21/2002, 1:18 pm
Re: Tools: thanks!
Kurt Loup, Baton Rouge -- 8/21/2002, 2:09 pm
Re: Bet not!
Don Beale -- 8/22/2002, 12:00 am
Thanks for the link, Don
Brian Nystrom -- 8/22/2002, 1:33 pm