Boat Building Forum

Find advice on all aspects of building your own kayak, canoe or any lightweight boats

Re: Epoxy: Teak and epoxy
By:greg root
Date: 11/3/2002, 5:44 pm
In Response To: Re: Epoxy: Teak and epoxy *Pic* (Joe Greenley)

: Hello Greg,
: Even though it is a rather oily wood, teak is epoxied quite a bit in boat
: building and can be done successfully. It is a good idea to remove any oil
: that migrates to the surface before applying epoxy by wiping with acetone
: or laquer thinner.
: This photo is of a coaming/recess built from teak - the sheer strips and
: outside stems are also from teak.
: Joe Greenley
: Redfish Kayaks

Joe-Thanks for the advice (Rehd and Leigh too); that's a beautiful boat! What other woods were used?
Would a few successive treatments increase the chances for good adhesion between the teak and epoxy?-Greg

Messages In This Thread

Epoxy: Teak and epoxy
greg root -- 11/3/2002, 10:33 am
Re: Epoxy: Teak and epoxy *Pic*
Joe Greenley -- 11/3/2002, 12:41 pm
Re: Epoxy: Teak and epoxy
Mike and Rikki -- 12/21/2002, 3:20 am
Re: Epoxy: Teak and epoxy
Joe Greenley -- 12/22/2002, 10:10 pm
Re: Epoxy: Teak and epoxy
Ted Henry -- 12/21/2002, 11:11 am
Re: Epoxy: Teak and epoxy
Mike and Rikki -- 12/22/2002, 9:29 pm
Re: Epoxy: Teak and epoxy
Ted Henry -- 12/22/2002, 11:41 pm
Redwood, carbon fiber, and some ideas
Mike and Rikki -- 12/24/2002, 2:27 am
Re: Dark stripes, try ebony
Grant Goltz -- 12/23/2002, 12:47 am
Re: Epoxy: Teak and epoxy
greg root -- 11/3/2002, 5:44 pm
Re: Epoxy: Teak and epoxy
Joe Greenley -- 11/4/2002, 12:13 am
Re: Epoxy: Teak and epoxy
Jeff H -- 11/5/2002, 10:14 pm
Re: Epoxy: Teak and epoxy
Rehd -- 11/3/2002, 1:54 pm
Re: Epoxy: Teak and epoxy
Joe Greenley -- 11/4/2002, 12:06 am
Re: R2K3... Brownies :)
Rehd -- 11/4/2002, 1:16 am
Re: Epoxy: Teak and epoxy
Leigh Ross -- 11/3/2002, 10:44 am
Re: Epoxy: Teak and epoxy
James Jay -- 11/5/2002, 8:28 pm
Spanish Cedar (was: Epoxy: Teak and epoxy)
Ed Falis -- 11/3/2002, 12:02 pm
Re: Spanish Cedar (was: Epoxy: Teak and epoxy)
Fred Church -- 11/5/2002, 10:01 pm
Re: Spanish Cedar (was: Epoxy: Teak and epoxy)
Ed Falis -- 11/5/2002, 10:59 pm
Re: Spanish Cedar (was: Epoxy: Teak and epoxy) *LINK*
Kurt Loup, Baton Rouge -- 11/4/2002, 9:13 am
Re: Spanish Cedar (was: Epoxy: Teak and epoxy)
Ed Falis -- 11/4/2002, 9:35 am