Boat Building Forum
Find advice on all aspects of building your own kayak, canoe or any lightweight boats
Re: Epoxy: compatibility of different epoxies
In Response To: Epoxy: compatibility of different epoxies (Mark de Araujo)
On the second and third boats I built I had some MAS epoxy left from the first project. I used some of it to get started then switched over to the RAKA. I allowed sufficient curing time between the switch and had no problems. Just keep in mind that RAKA is nearly colorless so if the origingal has any tint to it make sure you use a whole coat or you may see a dividing line between 2 different shades.
Randy
Messages In This Thread
- Epoxy: compatibility of different epoxies
Mark de Araujo -- 11/15/2002, 6:58 am- Re: Epoxy: compatibility of different epoxies
Tom Johansnen -- 11/18/2002, 12:54 am- Re: Epoxy: compatibility of different epoxies
Don Beale -- 11/15/2002, 1:15 pm- Re: Epoxy: compatibility of different epoxies
Shawn Baker -- 11/15/2002, 12:53 pm- Re: Epoxy: compatibility of different epoxies
Randy -- 11/15/2002, 10:07 am- Probably, but...
Rick Allnutt -- 11/15/2002, 9:50 am - Re: Epoxy: compatibility of different epoxies
- Re: Epoxy: compatibility of different epoxies
