Messages In This Thread

Strip: 3/8" cove and bead cutter?
Reg Lake -- 11/27/2002, 12:30 pm

Been there, done that
Pascal, in Chile -- 11/27/2002, 9:53 pm

Re: Strip: 3/8" cove and bead cutter?
Brad Farr -- 11/27/2002, 7:13 pm

Check your computer for a math error
Paul G. Jacobson -- 11/27/2002, 8:10 pm

Re: Strip: 3/8" cove and bead cutter?
Reg Lake -- 11/27/2002, 8:08 pm

Why bother with a full bead and cove? *Pic*
Paul G. Jacobson -- 11/27/2002, 5:35 pm

Re: Why bother with a full bead and cove?
Reg Lake -- 11/27/2002, 6:37 pm

Re: Strip: 3/8" cove and bead cutter?
Rick Allnutt -- 11/27/2002, 12:58 pm

Re: Strip: 3/8" cove and bead cutter?
Reg Lake -- 11/27/2002, 1:02 pm

Re: Strip: 3/8" cove and bead cutter?
Rick Allnutt -- 11/27/2002, 1:09 pm

Re: Strip: 3/8" cove and bead cutter? *LINK*
Reg Lake -- 11/27/2002, 1:16 pm

Re: Strip: 3/8" cove and bead cutter? *LINK*
Reg Lake -- 11/27/2002, 1:30 pm

Re: Strip: 3/8" cove and bead cutter?
Kurt Loup, Baton Rouge -- 11/27/2002, 3:01 pm

Re: Speed Control Accessory *LINK* *Pic*
Dave Houser -- 11/27/2002, 4:35 pm

Re: Dave is post # 75,000 *NM*
Roger Nuffer -- 11/30/2002, 10:13 am

Re: Dave is post # 75,000
Dave Houser -- 12/5/2002, 10:19 am

Re: Dave is post # 75,000
Roger Nuffer -- 12/5/2002, 2:04 pm

Re: Strip: 3/8" cove and bead cutter?
Reg Lake -- 11/27/2002, 3:55 pm

Re: Strip: 3/8" cove and bead cutter? *LINK*
Steve Rasmussen -- 11/27/2002, 3:41 pm

Re: Strip: 3/8" cove and bead cutter?
Steve Rasmussen -- 11/27/2002, 3:56 pm

core box cutters for coves? Eh, maybe.
Paul G. Jacobson -- 11/27/2002, 5:07 pm

Re: Strip: 3/8" cove and bead cutter?
Brian Nystrom -- 11/27/2002, 1:29 pm

Re: Strip: 3/8" cove and bead cutter?
Reg Lake -- 11/27/2002, 1:32 pm