Boat Building Forum

Find advice on all aspects of building your own kayak, canoe or any lightweight boats

Re: Model Slicing
By:Mike Scarborough
Date: 12/3/2002, 9:41 pm
In Response To: Re: Strip: Lofting (Dave Schneider)

Several posts have recommended a model first. THat sounds like a great idea.
: I also like the model slicing idea to come up with the forms.

Think this one through first. Slicing a model makes it easy to measure the offsets on the buttocks and waterlines. The proper next step would be to scale these offsets up and loft the shape out at full size. If you skip directly from the sliced model to the forms, eliminating the lofting step, you have no way to fair out any inacuracies in the model or in the measuring process.

Messages In This Thread

Strip: Lofting *LINK*
david schneider -- 12/1/2002, 10:26 pm
Re: Strip: Lofting *LINK*
Jim Elbrecht -- 12/4/2002, 6:29 am
Re: Strip: Lofting
Dave Schneider -- 12/4/2002, 7:57 am
Re: Strip: Lofting
Chip Sandresky -- 12/2/2002, 8:12 pm
Re: Strip: Lofting *LINK*
david schneider -- 12/2/2002, 9:04 pm
Re: Strip: Lofting
Chip Sandresky -- 12/2/2002, 9:28 pm
Re: Strip: Lofting
Dave Schneider -- 12/3/2002, 9:23 am
Re: Model Slicing
Mike Scarborough -- 12/3/2002, 9:41 pm
Re: Model Slicing (not the kind magicians do) :)
Paul G. Jacobson -- 12/4/2002, 12:35 am
Re: Model Slicing (not the kind magicians do) :)
Chip Sandresky -- 12/4/2002, 4:39 pm
Ok I think I get it now. Thanks! *NM*
david schneider -- 12/3/2002, 9:52 pm
Re: Strip: Lofting *Pic*
Chip Sandresky -- 12/3/2002, 12:15 pm
Re: Strip: Half-models
Rehd -- 12/2/2002, 11:21 pm
Re: Strip: Half-models
Dave Schneider -- 12/3/2002, 9:14 am
Re: Strip: Lofting
Mark -- 12/2/2002, 7:56 pm
Thanks, other interesting shareware too. *NM*
david schneider -- 12/2/2002, 8:54 pm
Re: Lofting, Here's the traditional way
Ron Hagedorn -- 12/2/2002, 6:38 pm
Re: Lofting,
david schneider -- 12/2/2002, 7:45 pm
Re: Lofting,
Paul G. Jacobson -- 12/2/2002, 9:05 pm
Re: Strip: Lofting
Mike Scarborough -- 12/2/2002, 6:10 pm
Re: Strip: Lofting
Rick Allnutt -- 12/2/2002, 12:00 pm