Boat Building Forum

Find advice on all aspects of building your own kayak, canoe or any lightweight boats

Re: Material: Light weight layup
By:Shawn Baker
Date: 12/5/2002, 2:24 pm
In Response To: Material: Light weight layup (Larry C.)

Go for 4 oz. inside and out of 3/16" strips, or maybe even Raka's 3.25 oz. satin.

You might be able to even have 1/8" strips with 3.25 oz. or 4 oz. glass for racing...I would hesitate to use it for much touring...putting it on gravel beaches, etc.

For racers, though, lighter is best, and you can take your boat off the rack, straight to the water....

Sacrifice some durability for lightness...

Even big waves don't put as much stress on yaks as do hitting small rocks.

Shawn

: I'm building Nick's RBA to be used for fast touring/racing. I'm committed to
: the lightest possible layup. I am wondering what glass to buy that will
: give me the most strength and lightest weight. I have been thinking about
: 4 oz. plain weave with a few extra layers here and there but mostly one
: layer inside and out. I may use some unidirectional carbon in high stress
: areas.

: I am looking for any ideas to make this a light boat. It is being striped
: with 3/16" strips and will not have bulkheads or hatches or deck
: rigging. I may do bulkheads with hatches if I can make them super light,
: otherwise I will us float bags.

: Any lightweight ideas are appreciated.

: Thanks,

: Larry C.

Messages In This Thread

Material: Light weight layup
Larry C. -- 12/5/2002, 12:30 pm
I'm building one too
Jack Sanderson -- 12/6/2002, 2:49 pm
Re: I'm building one too
Larry C. -- 12/7/2002, 8:17 am
Thanks, everyone *NM*
Larry C. -- 12/7/2002, 8:22 am
Re: Material: Light weight layup
Paul G. Jacobson -- 12/6/2002, 1:08 am
Re: Material: Light weight layup
Jeff The Tall -- 12/6/2002, 3:18 pm
Re: Material: Light weight layup
Mike Loriz -- 12/6/2002, 1:11 pm
Re: Material: Light weight layup
Don Lucas -- 12/6/2002, 11:04 am
Re: Material: Light weight layup - Bulkheads
KenB -- 12/6/2002, 1:02 pm
Re: Material: Light weight layup - Bulkheads
Shawn Baker -- 12/6/2002, 4:44 pm
Re: Material: Light weight layup
Mark -- 12/5/2002, 6:53 pm
Re: Material: Light weight layup
Mike Loriz -- 12/6/2002, 12:57 pm
Re: Material: Light weight layup *Pic*
Chip Sandresky -- 12/5/2002, 7:25 pm
Budget, weaker pressure "vacuum bagging"
Paul G. Jacobson -- 12/6/2002, 10:42 pm
Re: vac bagging
Mark -- 12/6/2002, 10:15 am
Re: vac bagging
Jeff The Tall -- 12/6/2002, 2:48 pm
Re: vac bagging
Shawn Baker -- 12/6/2002, 6:16 pm
Re: vac bagging
Chip Sandresky -- 12/6/2002, 5:25 pm
Re: vac bagging
Mark -- 12/7/2002, 12:58 pm
Re: vac bagging *LINK*
david schneider -- 12/14/2002, 12:03 pm
Re: vac bagging
Roger Nuffer -- 12/14/2002, 12:58 pm
Re: vac bagging *LINK*
david schneider -- 12/14/2002, 4:25 pm
Re: vac bagging
Shawn Baker -- 12/6/2002, 6:20 pm
Re: vac bagging
Mark -- 12/6/2002, 4:52 pm
Re: vac bagging
Jeff The Tall -- 12/9/2002, 4:52 pm
Re: vac bagging - OK for Wiki?
Shawn Baker -- 12/6/2002, 6:19 pm
OT: thanks for the pic
Larry -- 12/5/2002, 10:50 pm
Re: Material: Light weight layup
Scott Fitzgerrell -- 12/5/2002, 3:18 pm
Re: Material: Light weight layup
Rob Macks -- 12/5/2002, 4:03 pm
Re: Material: Light weight layup
Shawn Baker -- 12/5/2002, 4:25 pm
Re: Material: Light weight layup
Mike Loriz -- 12/5/2002, 2:37 pm
Re: Material: Light weight layup
Jim Kozel -- 12/5/2002, 3:11 pm
Re: Material: Light weight layup
mike loriz -- 12/5/2002, 5:09 pm
Re: Material: Light weight layup
Jim Kozel -- 12/7/2002, 9:41 am
Re: Material: Light weight layup
Mike Loriz -- 12/10/2002, 7:33 pm
Re: Material: Light weight layup
Fred -- 12/7/2002, 10:08 am
Re: Material: Light weight layup
Jim Kozel -- 12/7/2002, 11:32 am
Re: Material: Light weight layup
KenB -- 12/5/2002, 2:29 pm
Re: Material: Light weight layup
LeeG -- 12/6/2002, 2:28 pm
Re: Material: Light weight layup
Chip Sandresky -- 12/5/2002, 3:12 pm
Re: Material: Light weight layup
Shawn Baker -- 12/5/2002, 2:24 pm
Out there.
Myrl Tanton -- 12/5/2002, 12:44 pm
Re: Out there.
Ross Sieber -- 12/5/2002, 1:49 pm
RE: Boom! - are you sure?
Myrl Tanton -- 12/5/2002, 3:50 pm
Re: RE: Boom! - are you sure?
Larry -- 12/5/2002, 10:34 pm
Re: Float bag contents
Shawn Baker -- 12/5/2002, 4:23 pm
Re: COTFLGUOAHAHA
Ross Sieber -- 12/5/2002, 5:13 pm
Re: RE: Boom! - are you sure? *LINK*
Ross Sieber -- 12/5/2002, 4:23 pm
Re: Out there.
Don Flowers -- 12/5/2002, 3:15 pm
Re: Boom!
Shawn Baker -- 12/5/2002, 2:17 pm
Re: Out there.
Bruce -- 12/5/2002, 1:18 pm