Boat Building Forum

Find advice on all aspects of building your own kayak, canoe or any lightweight boats

Re: Material: Light weight layup
By:mike loriz
Date: 12/5/2002, 5:09 pm
In Response To: Re: Material: Light weight layup (Jim Kozel)

Hello, Jim-

In my search I could not find 4 oz S-glass, only 6 oz, which was overkill for my purpose.

I just wet out the outside of the hull, with the 3.25 oz tight and the 6 oz skid plate. That 3.25 is gorgeous stuff-it took muuuch less epoxy to wet out than the 4 oz or 6 oz e-glass that I used on the other boats.

Do you know of a supplier for 4 oz s?

Mike
: Well, what about 4oz. S-glass? It's supposed to be as strong as 6 oz. e-glass
: (and about 2x as expensive). I'm going to try the 4 oz. s-glass on the
: Cirrus and the Merganser projects I'm currently working on. Ross Leidy
: used it on the deck of his Outer Island and it looks just fine, the slight
: ghosting of the fabric weave is only visible up close...so what!
: Thoughts/comments?

: Jim

Messages In This Thread

Material: Light weight layup
Larry C. -- 12/5/2002, 12:30 pm
I'm building one too
Jack Sanderson -- 12/6/2002, 2:49 pm
Re: I'm building one too
Larry C. -- 12/7/2002, 8:17 am
Thanks, everyone *NM*
Larry C. -- 12/7/2002, 8:22 am
Re: Material: Light weight layup
Paul G. Jacobson -- 12/6/2002, 1:08 am
Re: Material: Light weight layup
Jeff The Tall -- 12/6/2002, 3:18 pm
Re: Material: Light weight layup
Mike Loriz -- 12/6/2002, 1:11 pm
Re: Material: Light weight layup
Don Lucas -- 12/6/2002, 11:04 am
Re: Material: Light weight layup - Bulkheads
KenB -- 12/6/2002, 1:02 pm
Re: Material: Light weight layup - Bulkheads
Shawn Baker -- 12/6/2002, 4:44 pm
Re: Material: Light weight layup
Mark -- 12/5/2002, 6:53 pm
Re: Material: Light weight layup
Mike Loriz -- 12/6/2002, 12:57 pm
Re: Material: Light weight layup *Pic*
Chip Sandresky -- 12/5/2002, 7:25 pm
Budget, weaker pressure "vacuum bagging"
Paul G. Jacobson -- 12/6/2002, 10:42 pm
Re: vac bagging
Mark -- 12/6/2002, 10:15 am
Re: vac bagging
Jeff The Tall -- 12/6/2002, 2:48 pm
Re: vac bagging
Shawn Baker -- 12/6/2002, 6:16 pm
Re: vac bagging
Chip Sandresky -- 12/6/2002, 5:25 pm
Re: vac bagging
Mark -- 12/7/2002, 12:58 pm
Re: vac bagging *LINK*
david schneider -- 12/14/2002, 12:03 pm
Re: vac bagging
Roger Nuffer -- 12/14/2002, 12:58 pm
Re: vac bagging *LINK*
david schneider -- 12/14/2002, 4:25 pm
Re: vac bagging
Shawn Baker -- 12/6/2002, 6:20 pm
Re: vac bagging
Mark -- 12/6/2002, 4:52 pm
Re: vac bagging
Jeff The Tall -- 12/9/2002, 4:52 pm
Re: vac bagging - OK for Wiki?
Shawn Baker -- 12/6/2002, 6:19 pm
OT: thanks for the pic
Larry -- 12/5/2002, 10:50 pm
Re: Material: Light weight layup
Scott Fitzgerrell -- 12/5/2002, 3:18 pm
Re: Material: Light weight layup
Rob Macks -- 12/5/2002, 4:03 pm
Re: Material: Light weight layup
Shawn Baker -- 12/5/2002, 4:25 pm
Re: Material: Light weight layup
Mike Loriz -- 12/5/2002, 2:37 pm
Re: Material: Light weight layup
Jim Kozel -- 12/5/2002, 3:11 pm
Re: Material: Light weight layup
mike loriz -- 12/5/2002, 5:09 pm
Re: Material: Light weight layup
Jim Kozel -- 12/7/2002, 9:41 am
Re: Material: Light weight layup
Mike Loriz -- 12/10/2002, 7:33 pm
Re: Material: Light weight layup
Fred -- 12/7/2002, 10:08 am
Re: Material: Light weight layup
Jim Kozel -- 12/7/2002, 11:32 am
Re: Material: Light weight layup
KenB -- 12/5/2002, 2:29 pm
Re: Material: Light weight layup
LeeG -- 12/6/2002, 2:28 pm
Re: Material: Light weight layup
Chip Sandresky -- 12/5/2002, 3:12 pm
Re: Material: Light weight layup
Shawn Baker -- 12/5/2002, 2:24 pm
Out there.
Myrl Tanton -- 12/5/2002, 12:44 pm
Re: Out there.
Ross Sieber -- 12/5/2002, 1:49 pm
RE: Boom! - are you sure?
Myrl Tanton -- 12/5/2002, 3:50 pm
Re: RE: Boom! - are you sure?
Larry -- 12/5/2002, 10:34 pm
Re: Float bag contents
Shawn Baker -- 12/5/2002, 4:23 pm
Re: COTFLGUOAHAHA
Ross Sieber -- 12/5/2002, 5:13 pm
Re: RE: Boom! - are you sure? *LINK*
Ross Sieber -- 12/5/2002, 4:23 pm
Re: Out there.
Don Flowers -- 12/5/2002, 3:15 pm
Re: Boom!
Shawn Baker -- 12/5/2002, 2:17 pm
Re: Out there.
Bruce -- 12/5/2002, 1:18 pm