Date: 12/5/2002, 6:58 pm
: Well did something stupid and broke my yak. Well not too bad. I have crushed
: about 6 inches of my bow on the lower edge. It was just deep enough to go
: through the wood but not the inner layer of glass. I am planning to plane
: down through the damage and build back up using walnut. Here is my
: dilemma. I have RAKA no blush epoxy this takes about 12 hrs to set well. I
: want to build up almost 2 inches of walnut. At 1/8 inch thick this will
: take at least 8 days if I use the RAKA epoxy. If I use 5 min. epoxy the
: laminating will take less than one day. Then there is option 3 witch is
: buying epoxy just for the laminating.
: Now having said that why would I not want to use the 5 min. epoxy?
: Sage.
: P.S. My mother-in-law will be staying with me for 3 weeks. I would like to
: get as much paddling time as possible during this time.
The man at Hoby Shack told me 5 minute is not water proof, so I used the 30 min with 2 or so minutes of heat gun when mixing. It made it amost as fast as 5 min.
Don
Messages In This Thread
- Epoxy: laminating
sage -- 12/5/2002, 3:29 pm- Healthy End Pour Helps!
Robert N Pruden -- 12/12/2002, 5:30 am- Pls reexplain. I'm a little slower than your epoxy
Paul G. Jacobson -- 12/5/2002, 11:09 pm- lets try that agin. only one time this time
sage -- 12/6/2002, 1:23 am- Why not just fix the veneer and do an endpour? *NM*
Paul G. Jacobson -- 12/6/2002, 10:05 pm- what veneer? *NM*
sage -- 12/7/2002, 12:39 pm- umm that 1/4 inch walnut IS a bit thicker isn't it
Paul G. Jacobson -- 12/7/2002, 3:37 pm- Re: umm that 1/4 inch walnut IS a bit thicker isn'
sage -- 12/9/2002, 11:33 am
- Re: umm that 1/4 inch walnut IS a bit thicker isn'
- umm that 1/4 inch walnut IS a bit thicker isn't it
- what veneer? *NM*
- OH my god!!! a cut and paste nightmare!!!!!!!!!!! *NM*
sage -- 12/6/2002, 1:20 am- Re: Pls reexplain. I'm a little slower than your e
sage -- 12/6/2002, 1:17 am- Re: Pls reexplain. I'm a little slower than your e
Shawn Baker -- 12/6/2002, 10:29 am
- Why not just fix the veneer and do an endpour? *NM*
- Re: Epoxy: laminating
Don Lucas -- 12/5/2002, 6:58 pm- Re: Epoxy: laminating
Shawn Baker -- 12/5/2002, 4:27 pm- Re: Epoxy: laminating
sage -- 12/5/2002, 4:50 pm- Re: Epoxy: laminating
Shawn Baker -- 12/5/2002, 5:35 pm
- Re: Epoxy: laminating
- Re: Epoxy: laminating
Tony -- 12/5/2002, 4:21 pm- Re: Epoxy: laminating
sage -- 12/5/2002, 5:04 pm
- Pls reexplain. I'm a little slower than your epoxy
- Healthy End Pour Helps!