Boat Building Forum

Find advice on all aspects of building your own kayak, canoe or any lightweight boats

Re: glad I asked
By:Ken Sutherland
Date: 12/7/2002, 9:26 pm
In Response To: glad I asked (Randy Knauff)

Randy et al,

What if one was to glass the deck (or piece to be bent) and wire it together while the glass/epoxy was still green. After the piece had cured the curve would be locked in place with little or no extra stressing.

Should work???

Ken

: Thanks for the advice/knowledge. I'll do it after assembly and save any
: glassing first only for flat pieces that are not subject to any bending
: forces.
: Randy

Messages In This Thread

Other: Interior Glass Needed?
Paul J -- 12/6/2002, 12:18 pm
Re: Other: Interior Glass Needed?
Jason -- 12/7/2002, 8:48 pm
Re: Less Tape & More Glass *LINK*
Dave Houser -- 12/7/2002, 12:41 pm
Re: Less Tape & More Glass
LeeG -- 12/7/2002, 5:33 pm
Re: Other: Interior or sandwhiched Glass Needed?
Andre Janecki -- 12/7/2002, 7:10 am
Re: Other: Interior Glass Needed?
Nick Schade - Guillemot Kayaks -- 12/6/2002, 6:25 pm
glass first?
Randy Knauff -- 12/7/2002, 1:51 am
Re: glass first?
Bruce S -- 12/7/2002, 7:20 pm
Re: Bend, glass then install radiused decks
Dave Houser -- 12/8/2002, 4:18 pm
Re: glass first?
Mark Kopp -- 12/7/2002, 3:51 pm
Re: glass first?
Paul G. Jacobson -- 12/7/2002, 4:06 pm
glad I asked
Randy Knauff -- 12/7/2002, 5:00 pm
Re: glad I asked
LeeG -- 12/9/2002, 9:58 am
Re: glad I asked
Ken Sutherland -- 12/7/2002, 9:26 pm
Re: glass first?
Nick Schade - Guillemot Kayaks -- 12/7/2002, 2:39 pm
All Things Considered
Paul J -- 12/6/2002, 4:49 pm
Re: All Things Considered
LeeG -- 12/6/2002, 6:13 pm
Which side is under tension and compression?
Rick Allnutt -- 12/6/2002, 3:27 pm
Re: Other: Interior Glass Needed?
Rob P -- 12/6/2002, 3:06 pm
Re: Other: Interior Glass Needed?
LeeG -- 12/6/2002, 2:16 pm
Re: Other: Interior Glass Needed?
Jay Babina -- 12/6/2002, 1:47 pm
Re: Other: Interior Glass Needed?
Mike Hanks -- 12/6/2002, 1:19 pm