Boat Building Forum

Find advice on all aspects of building your own kayak, canoe or any lightweight boats

Re: Tools: Scary-Sharp
By:KenC
Date: 12/9/2002, 11:32 pm
In Response To: Re: Tools: Sharpening (Rehd)

Yep, Scary-Sharp works. My only trip to the ER since starting the kayak was after a freshly sharpened chisel sliced into my palm. About 1/4" deep by 2" long, it took 6 stitches to close (if I remember right). I could see that I was cut, and there was blood all over the floor (thankfully, none on the cedar), but I never felt a thing. My first thought was "Holy ****, is that ever sharp".

BTW, the accident was a result of my being stupid about my free hand position, in relation to the position of the chisel. A momentary lapse of reason. Two inches to the left, and it would have sliced crossed my wrist. Nuff said. I won't make that mistake again.

But man, that chisel was sharp.

: I use this method, the "Scary-Sharp" method, and I use 220, 320,
: 400, 600, 800, 1,000, 1,200, 1,500 and 2,000 grits in the silicone-carbide
: ( wet/dry ) paper on a piece of 3/8" thick plate glass about 16"
: x 20". I have a cheap guide to keep my angles and work the blades
: about 15 seconds on each grit ( wet ) and it always comes out like a
: mirror and sharp enough to shave with. Done it with a block plane blade.

Messages In This Thread

Tools: wood planes
Ron Jenkins -- 12/7/2002, 8:08 pm
Re: Tools: wood planes
Brian Nystrom -- 12/9/2002, 3:02 pm
Re: Tools: wood planes
Rob P -- 12/10/2002, 10:31 am
Re: Tools: wood planes *Pic*
Chip Sandresky -- 12/8/2002, 7:31 pm
Re: Tools: wood planes
Randy Oswald -- 12/9/2002, 5:09 pm
Re: Tools: wood planes
Mike Scarborough -- 12/8/2002, 8:28 am
Re: Tools: wood planes *LINK*
Kurt Loup, Baton Rouge -- 12/7/2002, 10:45 pm
Re: Tools: Sharpening
Chris -- 12/7/2002, 11:09 pm
Re: Tools: Sharpening
Chip Sandresky -- 12/11/2002, 2:07 pm
Link to Scary Sharp *LINK*
Rick Allnutt -- 12/10/2002, 8:43 am
One Scary Sharp caveat
Brian Nystrom -- 12/10/2002, 1:04 pm
Re: Tools: Sharpening
Jay Babina -- 12/9/2002, 9:06 am
Re: Tools: Sharpening
Rehd -- 12/9/2002, 9:40 pm
Re: Tools: Sharpening
Rick Allnutt -- 12/10/2002, 8:16 am
Re: Tools: More on Sharpening
Rehd -- 12/10/2002, 4:14 pm
Re: My Set Up... Cheap, but Affective *Pic*
Rehd -- 12/12/2002, 1:41 pm
Re: My Set Up... Cheap, but Affective
Ken Sutherland -- 12/13/2002, 12:53 am
Re: Special Delivery
Rehd -- 12/13/2002, 2:57 am
Jigs *Pic*
Bill Price -- 12/11/2002, 12:46 pm
Thanks Rehd! Great post! *NM*
Rick Allnutt -- 12/11/2002, 8:01 am
Re: Tools: Scary-Sharp
KenC -- 12/9/2002, 11:32 pm