Re: Epoxy: Mold Release Wax and Fisheyes
By:warren
Date: 12/11/2002, 1:34 am
Date: 12/11/2002, 1:34 am
In Response To: Epoxy: Mold Release Wax and Fisheyes (Chip Sandresky)
: IHow do I remove the wax. I guess I'll try
: vinegar and work my way up from there.
I have used ammonia many times to remove wax, it does work, although you don't need to use it full strength, about 50/50 ammonia and water is enough...test a small area and adjust the mixture. I have used it for that very purpose many times, there are wax removers you can get at most hardware stores to but ammonia will do it. whatever you use , be carefull and keep us updated on that contraption..it's cool!
Messages In This Thread
- Epoxy: Mold Release Wax and Fisheyes
Chip Sandresky -- 12/10/2002, 2:34 pm- Re: Epoxy: Mold Release Wax and Fisheyes
Mike Hanks -- 12/11/2002, 12:03 pm- Re: Epoxy: Mold Release Wax and Fisheyes
Mike and Rikki -- 12/11/2002, 2:24 pm
- Re: Epoxy: Mold Release Wax and Fisheyes
warren -- 12/11/2002, 1:34 am- Re: Epoxy: Mold Release Wax and Fisheyes
Ken Sutherland -- 12/11/2002, 1:12 am- Re: Epoxy: Mold Release Wax and Fisheyes
Paul G. Jacobson -- 12/10/2002, 7:41 pm- Re: Epoxy: Mold Release Wax and Fisheyes
Armin -- 12/10/2002, 4:31 pm- use a blow drier to heat and than wipe *NM*
steven hartmann -- 12/10/2002, 4:25 pm - Re: Epoxy: Mold Release Wax and Fisheyes
- Re: Epoxy: Mold Release Wax and Fisheyes