Boat Building Forum

Find advice on all aspects of building your own kayak, canoe or any lightweight boats

Re: Material: Removing wood plugs from aluminum tu
By:Kurt Loup, Baton Rouge
Date: 12/17/2002, 9:22 am
In Response To: Re: Material: Removing wood plugs from aluminum tu (Jim Elbrecht)

: -snip-

: I'd give 'super-drying' a go. Make a dryer from some 4" PVC & a hair
: dryer- shove a couple [try one first to make the process reach the
: 'works/don't-work stage' quicker] pipes in & run it overnight.

: If you're lucky they aren't epoxied, just friction-fit.

: Jim

I like this idea the best. How about a light bulb in the PVC for a few days to lower the moisture content of the wood? Some bamboo flyrod makers use heat guns to heat pipe type ovens for removing moisture from bamboo. About 10 minutes at 375* is the norm.

Kurt

Messages In This Thread

Material: Removing wood plugs from aluminum tubing
Shawn Baker -- 12/17/2002, 12:00 am
Look up impossible in the dictionary...
Rick Allnutt -- 12/17/2002, 6:23 pm
Re: Waittaminute!!!
Shawn Baker -- 12/17/2002, 7:00 pm
Re: Waittaminute!!!
Rick Allnutt -- 12/17/2002, 10:19 pm
Re: Look up impossible in the dictionary...
Shawn Baker -- 12/17/2002, 6:59 pm
Fahrenheit 452 -- It just might do -- for you :)
Paul G. Jacobson -- 12/17/2002, 8:25 pm
Oak!!
Shawn Baker -- 12/17/2002, 10:07 pm
Pass the salt, I will eat my words...
Rick Allnutt -- 12/17/2002, 10:20 pm
Re: not just yet!
Shawn Baker -- 12/18/2002, 12:20 pm
Putting wood plugs in aluminum tubes
Bill Price -- 12/17/2002, 2:47 pm
Re: Material: Removing wood plugs from aluminum tu
Reg Lake -- 12/17/2002, 12:27 pm
Re: Material: Removing wood plugs from aluminum tu
Tom Yost -- 12/17/2002, 10:11 am
Re: Material: Removing wood plugs from aluminum tu *LINK*
Pete Rudie -- 12/17/2002, 11:10 am
Re: Material: Removing wood plugs from aluminum tu
Tom Yost -- 12/17/2002, 1:34 pm
Re: Material: Removing wood plugs from aluminum tu
Shawn Baker -- 12/17/2002, 10:21 am
Re: Material: Removing wood plugs from aluminum tu
don flowers -- 12/17/2002, 11:00 pm
chemical warfare
Don Flowers -- 12/17/2002, 11:01 am
lignin destroyers, wood eaters
mike allen -- 12/17/2002, 1:21 pm
Re: Material: Removing wood plugs from aluminum tu
Timothy -- 12/17/2002, 8:54 am
Re: Material: Removing wood plugs from aluminum tu
Jim Elbrecht -- 12/17/2002, 8:16 am
Re: Material: Removing wood plugs from aluminum tu
Kurt Loup, Baton Rouge -- 12/17/2002, 9:22 am
Re: termites? :) *NM*
Ross Leidy -- 12/17/2002, 6:50 am
I love this! Ross. No damage to metal. *NM*
Tony -- 12/18/2002, 7:41 pm
Re: ...but I'll have problems stopping them! *NM*
Shawn Baker -- 12/17/2002, 10:17 am
Re: Material: Removing wood plugs from aluminum tu
Richard Kohlström -- 12/17/2002, 2:34 am
Re: Material: Removing wood plugs from aluminum tu
Tony -- 12/18/2002, 7:40 pm
Re: Material: Removing wood plugs from aluminum tu
Mike Hanks -- 12/17/2002, 1:51 am
Re: Material: Removing wood plugs from aluminum tu
Shawn Baker -- 12/17/2002, 10:16 am
Re: Material: Removing wood plugs from aluminum tu
Eric -- 12/17/2002, 11:50 am
Re: Material: Removing wood plugs from aluminum tu
Jeff The Tall -- 12/17/2002, 1:32 am
Re: Denatured alcohol?
Shawn Baker -- 12/17/2002, 10:13 am
Re: Denatured alcohol?
Tony -- 12/18/2002, 7:35 pm
Re: Denatured alcohol?
Jeff The Tall -- 12/17/2002, 2:01 pm
Re: Material: Removing wood plugs from aluminum tu
Chip Sandresky -- 12/17/2002, 12:48 am
Re: Material: Removing wood plugs from aluminum tu
Greg Bridges -- 12/17/2002, 12:03 am
Re: Material: Removing wood plugs from aluminum tu
Shawn Baker -- 12/17/2002, 12:06 am
Re: Material: Removing wood plugs from aluminum tu
Scott Fitzgerrell -- 12/17/2002, 12:50 am
Re: Material: Removing wood plugs from aluminum tu
John K -- 12/17/2002, 9:52 pm
Re: extra long bits
Tony -- 12/18/2002, 7:13 pm
Re: Material: Removing wood plugs from aluminum tu
Greg Bridges -- 12/17/2002, 12:22 am