: I thought about that, but decided to go ahead anyway. The glass can't
: compress much, so there will still be void space for the epoxy to fill. It
: can't all squeeze out. At least that's what I've convinced myself. Time
: will tell.

: Are the magnets you're using really 1/2" x 1/4"? The ones I used,
: from Lee Valley, are 1/2" diameter by 1/8" thick. My strips were
: slightly less than 1/4" to begin with, and thinner after sanding, so
: a 1/4" thick magnet would
: have stuck out on the topside, when flush with the underside.

You are correct, they are 1/2" x 1/8" thick, sorry about that. I am fortunate to own a shopsmith which makes the drilling with stop pretty easy, just test on scrap piece of wood for proper depth setting. A drill press could be setup the same.

: ken