Re: S&G: Another photo
By:Chip Sandresky
Date: 1/8/2003, 2:03 pm
Date: 1/8/2003, 2:03 pm
In Response To: Re: S&G: Another photo *NM* *Pic* (Scott Ferguson)
I've been at the One Ocean Kayak site a lot lately and the more I read about Cirrus, the more excited I get. It looks like you are well on your way. I'd be real interested in trying it out when you are done. What's your plan for the deck: Strip, SOF?
Messages In This Thread
- S&G: Cirrus started, then got left behind *Pic*
Scott Ferguson -- 1/8/2003, 1:36 pm- Left in the Sawdust
grant -- 1/8/2003, 4:00 pm- Re: Just keep making sawdust, it's not a race
Scott Ferguson -- 1/8/2003, 5:23 pm- A strong 2nd on Vaclav's plans and instructions
David Hanson -- 1/9/2003, 9:55 am- Re: A strong 2nd on Vaclav's plans and instruction
Jim Kozel -- 1/9/2003, 12:04 pm- Stock cocpit, no recess *Pic*
David Hanson -- 1/9/2003, 8:08 pm
- Stock cocpit, no recess *Pic*
- Re: Just keep making sawdust, it's not a race
Arko Bronaugh -- 1/8/2003, 9:00 pm - Re: A strong 2nd on Vaclav's plans and instruction
- A strong 2nd on Vaclav's plans and instructions
- Re: S&G: Another photo *NM* *Pic*
Scott Ferguson -- 1/8/2003, 1:38 pm- Re: S&G: Another photo
Chip Sandresky -- 1/8/2003, 2:03 pm- Re: S&G: Cirrus design
Scott Ferguson -- 1/8/2003, 2:51 pm- strip edges for barrel shaped deck arches
Paul G. Jacobson -- 1/8/2003, 8:28 pm- Re: Combination B&C and edge beveled strips
Scott Ferguson -- 1/9/2003, 3:47 pm- Re: Combination B&C and edge beveled strips
srchr/gerald -- 1/10/2003, 11:30 am- Re: Combination B&C and edge beveled strips
Steve Rasmussen -- 1/9/2003, 7:01 pm- Re: Combination B&C and edge beveled strips *Pic*
Steve Rasmussen -- 1/10/2003, 12:09 am- Re: B&C or beveled edged strips
Scott Ferguson -- 1/10/2003, 4:30 pm- Re: B&C or beveled edged strips
Steve Rasmussen -- 1/11/2003, 12:37 am
- Re: B&C or beveled edged strips
- Re: B&C or beveled edged strips
- Re: Combination B&C and edge beveled strips
- Re: Combination B&C and edge beveled strips
- Re: Combination B&C and edge beveled strips
- strip edges for barrel shaped deck arches
- Re: S&G: Cirrus design
- Re: Just keep making sawdust, it's not a race
- Left in the Sawdust