Boat Building Forum

Find advice on all aspects of building your own kayak, canoe or any lightweight boats

Interlux vs System 3
By:grant
Date: 1/16/2003, 4:10 pm
In Response To: Re: Material: Two Part Polyurethane (Kurt Loup, Baton Rouge)

: I'm varnishing with the two part Interlux Perfection Varnish. The West Marine
: salesman verified with the Interlux tech person that this is in fact the
: Interlux Plus clear renamed and packaged. I like the gloss I am getting
: with the product. A respirator is a must as the
: fumes are terrible. I tried the System 3 waterbased LPU and didn't like
: its matte finish. It was easy enough to apply, but I found the finish to
: be hazy. I sanded it off and applied the Perfection Varnish. In the past I
: used Helmsman Spar Urethane with good results, but the abrasion resistance
: is nothing to brag about.

: Kurt

Kurt:

I am still a long way from final finishing but I have been duly considering these two treatments. System 3 caught my attention since it is water based, but it's downfall for some may be it's matte finish.

Do you happen to have comparitive photos showing the two finishes?

grant

Messages In This Thread

Material: Two Part Polyurethane
Tim Eastman -- 1/16/2003, 1:10 pm
Re: Material: Two Part Polyurethane
Dean Trexel -- 1/16/2003, 6:45 pm
Re: Material: Two Part Polyurethane
Grant Goltz -- 1/19/2003, 10:11 pm
Re: Material: Two Part Polyurethane
Joe -- 1/20/2003, 1:57 am
Re: Material: Two Part Polyurethane
Matthew -- 1/16/2003, 4:30 pm
Re: Material: Two Part Polyurethane
Kurt Loup, Baton Rouge -- 1/16/2003, 5:32 pm
Re: Material: Two Part Polyurethane
sing -- 1/16/2003, 5:00 pm
Re: Material: Two Part Polyurethane
Kurt Loup, Baton Rouge -- 1/16/2003, 1:47 pm
Interlux vs System 3
grant -- 1/16/2003, 4:10 pm
Re: Interlux vs System 3
Kurt Loup, Baton Rouge -- 1/16/2003, 5:15 pm
Re: Material: Two Part Polyurethane
Ted Henry -- 1/16/2003, 3:02 pm
Re: Material: Two Part Polyurethane *LINK*
Ted Henry -- 1/16/2003, 1:30 pm