Boat Building Forum
Find advice on all aspects of building your own kayak, canoe or any lightweight boats
How best to use PVC?
In Response To: Re:PVC *Pic* (Tom Yost)
Tom,
I'm trying to envision how this could be applied to an SOF frame. Does the following sound feasible?
- Stretch the hull material into place and staple it to the top or inside of the gunwales
- Stretch the deck material into place and glue it to the hull material at the gunwales.
- Trim the deck edges flush with the outer edge of the gunales, then seal them with additional glue.
- Sew the coaming in place in the traditional manner and seal with the PVC glue.
BTW, is this material fabric reinforced or is it like pool liner material?
Thanks
Brian
Messages In This Thread
- Skin-on-Frame: Do you need 9oz Dacron for covering?
Leigh Ross -- 1/30/2003, 3:43 pm- Re: Skin-on-Frame: Do you need 9oz Dacron for cove
Tom Yost -- 1/31/2003, 10:20 pm- Re:PVC
srchr/gerald -- 2/1/2003, 11:42 am- Re:PVC *Pic*
Tom Yost -- 2/1/2003, 7:32 pm- Re:PVC
Jim Kozel -- 2/3/2003, 3:53 pm- Re:PVC
Tom Yost -- 2/3/2003, 4:29 pm
- How best to use PVC?
Brian Nystrom -- 2/3/2003, 12:49 pm- Re: How best to use PVC?
Tom Yost -- 2/3/2003, 4:17 pm
- Re:PVC
- Re Dacron
Leigh Ross -- 2/1/2003, 4:05 pm - Re:PVC
- Re:PVC *Pic*
- Re: Skin-on-Frame: Do you need 9oz Dacron for cove
Kent LeBoutillier -- 1/31/2003, 8:08 pm- 9 oz Poly/Dacron The full story
Leigh Ross -- 1/31/2003, 9:26 pm
- Re: Skin-on-Frame: Do you need 9oz Dacron for cove
Bill Price -- 1/31/2003, 2:52 pm- Re: Skin-on-Frame: Do you need 9oz Dacron for cove
Shawn Baker -- 1/31/2003, 1:17 pm- Re: Skin-on-Frame: Do you need 9oz Dacron for cove
Brian Nystrom -- 1/31/2003, 12:34 pm- Why Dacron?
Jay Babina -- 1/31/2003, 9:35 am- Dacron = polyester
Brian Nystrom -- 1/31/2003, 12:35 pm
- Re:PVC
- Re: Skin-on-Frame: Do you need 9oz Dacron for cove
