Boat Building Forum
Find advice on all aspects of building your own kayak, canoe or any lightweight boats
Gluing Veneer - another way
In Response To: Material: Rehd: Gluing Veneer on S&G (grant)
You can use 15 min epoxy. Clean the deck good with a fine sanding. Spread the mixed epoxy on the back of the decorative veneer. In a short time the epoxy will be very sticky. Press into position and burnish or roll it down with a piece of waxed paper over it.
Messages In This Thread
- Material: Rehd: Gluing Veneer on S&G
grant -- 2/3/2003, 10:32 am- Well.....
srchr/gerald -- 2/5/2003, 7:25 pm- Gluing Veneer - another way
Jay Babina -- 2/5/2003, 12:58 pm- Response from Gougen Bros.
grant -- 2/5/2003, 3:54 pm
- Re: Material: Rehd: Gluing Veneer on S&G
Rehd -- 2/3/2003, 11:43 pm- No Apologies Required
grant -- 2/4/2003, 9:48 am
- Questions....
srchr -- 2/3/2003, 7:16 pm- opinions & thoughts which may just be answers
Paul G. Jacobson -- 2/4/2003, 11:43 pm- Heat n'Bond - Answering My Own Question *LINK*
grant -- 2/5/2003, 10:08 am- And Some Very Interesting Thoughts Indeed
grant -- 2/5/2003, 9:55 am - And Some Very Interesting Thoughts Indeed
- Questions.... on Veneer & Plywood Glues
grant -- 2/3/2003, 7:42 pm - Heat n'Bond - Answering My Own Question *LINK*
- Gluing Veneer - another way
- Well.....
